Manual Xterra TR800 TREADMILL (page 19 of 28) (English)

587188

Zoom out

Zoom in

1/28

TR800 Treadmill

The Heart Rate Programs use your treadmill’s incline system to adjust your heart rate. Increases and decreases

in elevation affect heart rate much more efciently than changes in speed. Additionally, changes in incline keep

you in control of the machine’s speed instead of the machine controlling you.

Selecting A Heart Rate Program

Both programs operate the same, the only difference is that HR1 is set to 60% and HR2 is set to 80% of the

maximum heart rate. They both are programmed the same way.

To start a HR program follow the instructions below or just select the HR1 or HR2 program, then the Enter button

and follow the directions in the Message Center.

After selecting your heart rate target, the program will attempt to keep you at or within 3 – 5 heart beats per min-

ute of this value. Follow the prompts in the Message Center to maintain your selected heart rate value.

CAUTION!

The target value used in HR-1 and HR-2 programs is a suggestion only for normal, healthy

individuals. Do not exceed your limits! You may not be able to obtain your chosen target. If

in question, enter a higher age value that will set a lower target goal.

1. Press the HRC 1-2 key once for HRC 1 (60% of max heart rate default) or twice for HRC 2

(60% of max heart rate default) then press Enter button.

2. The Message Center will ask you to enter your Age. You may enter your age, using the

Speed + / - keys, then press the Enter key to accept the new value and proceed on to the

next screen. Adjusting Age will change the Target HR value.

3. You are now asked to enter your weight. You may adjust the weight value using the

Speed + / - keys, then press Enter to continue.

4. Now you are asked to adjust the Heart Rate Target. This is the heart rate level you will

strive to maintain during the program. Adjust the level using the Speed + / - keys, then

press Enter.

5. Next is Time. You may adjust the time using the Speed + / - keys and press Enter to con-

tinue.

6. Now you are nished editing the settings and can begin your workout by pressing the

Start key. You can also go back and modify your settings by pressing the Stop key.

** Remember that you must maintain contact with the sensors or wear the chest strap for the

program to work.

Heart Rate Program Operation

NOTE: It is recommended that you use the telemetric chest strap to achieve the best results

with the heart rate programs.

Speed sensor dirty from Sheetrock work done in house where is it locate and how do I clean it? Submitted on 28-3-2023 at 02:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR800 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR800 TREADMILL Manual

Product: