Manual Xterra TR800 TREADMILL (page 15 of 28) (English)

587188

Zoom out

Zoom in

1/28

TR800 Treadmill

The Pulse (Heart Rate) readout will display your current heart rate in beats per minute

during the workout. You must use both stainless steel sensors on the side hand rails to

display your pulse. Pulse value displays anytime the upper display is receiving a Pulse

signal. You may not use the Grip Pulse feature while in Heart Rate Control.

Pulse Grip Feature

Displays the cumulative calories burned at any given time during your workout.

Note: This is only a rough guide used for comparison of different exercise sessions, which

cannot be used for medical purposes.

Calorie Display

1. Display will automatically turn off (go to sleep) after 30 minutes (no key operations). The

treadmill will draw very little current in sleep mode (about as much as your television when

it is turned off).

2. Remove tether cord.

3. Turn of the main switch on the front of the treadmill, below the motor cover.

You are able to set your speed and incline settings quickly by using the quick keys on the

console. Just press either Speed or Incline, then select 2 or 3 digits, then press Enter and the

treadmill will automatically adjust to that value. This saves time because you don’t have to

press and hold or hold a button down until reaching the desired value. The maximum value

you may input for speed is 12.0 mph and incline level 15. Speed values can be entered in .1

mph increments and Incline in 1.level increments.

To Turn Treadmill Off

Quick Speed & Incline Buttons

Examples:

Press the Quick Incline button, then 1, 0 = Incline Level 10

Press the Quick Incline button, then 0, 3 = Incline Level 3

Press the Quick Speed button, then 8, 0 = 8.0 mph or kmph

Press the Quick Speed button, then 0, 8 = 0.8 mph or kmph

Speed sensor dirty from Sheetrock work done in house where is it locate and how do I clean it? Submitted on 28-3-2023 at 02:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR800 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR800 TREADMILL Manual

Product: