Manual Xterra TR6.4 TREADMILL (page 6 of 28) (English)

587181

Zoom out

Zoom in

1/28

TR6.4 Treadmill

Important Operation Instructions

• NEVER operate this treadmill without reading and completely understanding the results of any

operational change you request from the computer.

• Understand that changes in speed and incline do not occur immediately. Set your desired speed on the

computer console and release the adjustment key. The computer will obey the command gradually.

• NEVER use your treadmill during an electrical storm. Surges may occur in your household power

supply that could damage treadmill components.

• Use caution while participating in other activities while walking on your treadmill; such as watching

television, reading, etc. These distractions may cause you to lose balance or stray from walking in the

center of the belt, which may result in serious injury.

• NEVER mount or dismount the treadmill while the belt is moving. XTERRA Fitness treadmills start with

at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the

belt during slow acceleration is proper after you have learned to operate the unit.

• ALWAYS hold on to a handrail or hand bar while making control changes (incline, speed, etc.).

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It

is for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop

tread-belt movement.

To Use:

1. Place the magnet into position on the round portion of the console control head. Your treadmill will not start

and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has

strong enough power to minimize accidental, unexpected stopping. The clip should be attached

securely to make certain it does not come off. Be familiar with its function and limitations. The

treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled

off the console.

Safety Tether Cord

Remove tether cord after use to prevent unauthorized treadmill operation.

I have xterra TR6.4. I'm getting a LS code. I tried calibrating it. It been in calibrating mode for several hours and nothing. Is there a solution to this issue? Submitted on 11-7-2020 at 04:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR6.4 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR6.4 TREADMILL Manual

Product: