Manual Xterra TR6.4 TREADMILL (page 8 of 28) (English)

587181

Zoom out

Zoom in

1/28

TR6.4 Treadmill

1. Remove all the parts from the carton and lay the Main Base Frame on a

at level surface.

TR6.4 Assembly Instructions

Main Base Frame

Uprights & Cables

1. Connect the Lower Computer Cable (55) from the frame to the Middle

Computer Cable (54) in the Left Upright (4). Tuck the wire connector

back into the frame so that you pinch the wires. Attach the Left Upright

(4) to the frame with four Hex Head Bolts (99) and four Flat Washers

(100). Tighten with the 13mm Wrench (90).

2. Attach the Right Upright (5) to the Frame Base (2) and use a 13mm

wrench (90) to tighten four Hex Head Bolts (99) and four Flat Washers

(100).

100

Hardware Step 2

#99. 5/16” x 1/2”

Hex Head Bolt (8 pcs)

#100. Ø5/16” x 18 x 1.5T

Flat Washer (8 pcs)

NOTE: This step may work better with a second person assisting.

I have xterra TR6.4. I'm getting a LS code. I tried calibrating it. It been in calibrating mode for several hours and nothing. Is there a solution to this issue? Submitted on 11-7-2020 at 04:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR6.4 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR6.4 TREADMILL Manual

Product: