Manual Xterra TR6.4 TREADMILL (page 5 of 28) (English)

587181

Zoom out

Zoom in

1/28

TR6.4 Treadmill

Important Electrical Information

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a

large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including

the elevation mechanism and transport wheels.

NEVER remove any cover without rst disconnecting AC power. If voltage varies by ten percent (10%) or more,

the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If

you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. See

Diagnosis Guide, page 23.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or

spa, or in any other high humidity environment. The temperature specication is 40 degrees celsius, and

humidity is 95%, non-condensing (no water drops forming on surfaces).

Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur

when a treadmill is rst turned on or even during normal use. If your treadmill is tripping the house circuit breaker

(even though it is the proper current rating) but the circuit breaker on the treadmill itself does not trip, you will

need to replace the home breaker with a high inrush type. This is not a warranty defect. This is a condition we as

a manufacture have no ability to control. This part is available through most electrical supply stores. Examples:

Grainger part # 1D237, or available online at www.squared.com part # QO120HM.

Grounding Instructions

This product must be grounded. If the treadmill’s electrical system should malfunction or breakdown

grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This

product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly

grounded. Do not modify the plug provided with the product if it will not t the outlet; have a proper outlet

installed by a qualied electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated

below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a

2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should

be used only until a properly grounded outlet, (shown below) can be installed by a qualied electrician. The

green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground

such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal

screw.

I have xterra TR6.4. I'm getting a LS code. I tried calibrating it. It been in calibrating mode for several hours and nothing. Is there a solution to this issue? Submitted on 11-7-2020 at 04:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR6.4 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR6.4 TREADMILL Manual

Product: