800723
9
Zoom out
Zoom in
Previous page
1/82
Next page
Multi-functional home gym – Instructions for use | 9
23 J-hooks 2
24 Top beam 1
25 Lower beam 1
26 Plate carriage 1
27 Pulley brace 2
28 Lat bar 1
29 Low bar 1
30 Bottom cross beam 1
31 Row plate 1
32 Plate holder left 2
33 Plate holder right 2
34 Bar connector 1
35 Dip bar 2
36 Olympic bar handle 1
1
2
3
4
5
6
TECHNICAL DETAILS
MODEL MAX.
PERSONS SIZES NET.
WEIGHT
RACK
8FE-000000 1 215 × 145 × 111 cm
85 × 57 × 44 inch
94,5 kg
208 lbs
ARTICLE PART MAX. WEIGHT
CAPACITY
1. Pull-up bar 337,5 kg | 745 lbs
2. Longer safety bar 135 kg | 298 lbs
3. Plate carriage 100 kg | 220 lbs
4. Dip bar 135 kg | 298 lbs
5. Plate holder 135 kg | 298 lbs
6. Barbell holder 135 kg | 298 lbs
INSTALLATION INSTRUCTION
IMPORTANT
THIS ITEM SHOULD ONLY BE USED BY ONE
PERSON AT THE TIME.
STEP 1 – MAIN FRAME
REQUIRED PARTS
NO. DESCRIPTION QTY
2 M10X70 Bolt 4
4 Nut 4
5 Washer 4
7 Foot cover 4
10 Bolt plate 2
18 Bottom base frame 2
30 Bottom cross beam 1
INSTRUCTION
1. Place the bottom cross beam horizontally on the
oor.
2. Place the foot covers on each side of the bottom
base frames.
3. Place the bottom base frames vertically on each
side of the bottom cross beam while placing the
foot cover downwards.
4. Tighten the bottom cross beam and the bottom
bases frames together by using the bolt, nut,
washer and bolt plate. Assure to place the bolt
plate on the outside of the bottom base frames.
STEP 2 – UPRIGHT FRAME
REQUIRED PARTS
NO. DESCRIPTION QTY
2 M10X70 Bolt 8
4 Nut 8
5 Washer 8
10 Bolt plate 4
16 Upright frame 4
INSTRUCTION
1. Place the upright frame on the base frame and
align the holes with each other.
2. Carefully lift the base frame and place the bolt
through the bolt plate, base frame and upright
frame and fasten with the nut and washer.
3. Repeat this step for the remaining three upright
frames.
NOTE: The end of the upright frame with side holes
must be at the top.
STEP 3 – UPPER CROSS FRAME
REQUIRED PARTS
NO. DESCRIPTION QTY
2 M10X70 Bolt 4
4 Nut 4
5 Washer 4
10 Bolt plate 2
20 Upper cross frame 2
INSTRUCTION
1. Place the upper cross frame on top of the upright
frame and align the holes with each other.
2. Place the bolt through the bolt plate, upper cross
frame and upright frame and fasten with the nut
and washer.
3. Repeat this step for the second cross frame.
STEP 4 – REAR CROSS BEAM
REQUIRED PARTS
NO. DESCRIPTION QTY
2 M10X70 Bolt 4
4 Nut 4
5 Washer 4
10 Bolt plate 2
21 Rear cross beam 1
INSTRUCTION
1. Place the rear cross frame horizontally from the
vertical upper cross frames above the bottom
cross beam and align the holes.
2. Place the bolt through the upper cross frame
and bolt plate and fasten with the nut and the
washer.
3. Repeat this step for the remaining three holes.
STEP 5 – CHROME PULL UP BAR
REQUIRED PARTS
NO. DESCRIPTION QTY
2 M10X70 Bolt 4
4 Nut 4
5 Washer 4
19 Chrome pull up bar 1
INSTRUCTION
1. Place the chrome pull up bar on top of the upper
cross frame across from the rear cross beam. Align
the holes.
2. Place the bolt through the chrome pull up bar and
upper cross frame and fasten with the nut and the
washer.
3. Repeat this step for the remaining three holes.
STEP 6 – ROW PLATE AND LOWER BEAM
SECTION
REQUIRED PARTS
NO. DESCRIPTION QTY
2 M10X70 Bolt 2
4 Nut 2
5 Washer 2
25 Lower beam 1
31 Row plate 1
INSTRUCTION
1. Place the row plate in front of the rear cross beam
with the at surface facing toward the lower
beam.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XQ Max 8FE-000000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XQ Max 8FE-000000 in the language / languages: All languages as an attachment in your email.

The manual is 4.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info