723922
11
Zoom out
Zoom in
Previous page
1/20
Next page
Owner’s Manual of Lawn Mowing Robot EN
11
and can also cause loose traction and slippage while working.
Your Landroid
®
is afraid of lightening storms. In case of a lightening storm, protect the Landroid
®
by unplugging the
Charging Base (3), disconnecting the Boundary Wire (17), and making sure the Landroid
®
is not allowed to charge.
Your Landroid
®
loves mowing grass and requires the Cutting Blades (12) to be kept in good condition to cut at its best. The
Landroid
®
can do most things by itself, but will sometimes need your help to prevent damage to itself.
Never let the Landroid
®
travel over gravel.
Remove or prevent access to obstacles that the Landroid
®
could accidentally climb on and damage its Blade Turning Disc.
Remove all debris and foreign objects from your lawn.
6. App
(Only available for some models. Please check Technical Data & Declaration of Conformity for
information specific to each model.)
Your Landroid
®
is able to connect with smartphone. Using the Landroid
®
App for your smartphone, you can change your
Landroid
®
's general settings, and view the machine's status and error messages.
To connect smartphone to your Landroid
®
:
Step 1: To download the Landroid
®
App, use your smartphone to scan the QR code below or download it from Playstore
(Google-Android), AppleStore (Apple-iOS) or our website www.worxlandroid.com.
Step 2: Enter the Landroid
®
APP, and then follow the instructions to connect to your Wi-Fi.
*The Serial No. can be found at the rear of Landroid
®
as shown in Fig. H.
NOTE:
1. If your Wi-Fi information changes, Landroid
®
needs to be re-set according to Step 1 to 2.
2. When Landroid
®
is located in an area with low or no Wi-Fi signal, instructions sent from the mobile App may not be
executed immediately. Landroid
®
will receive instructions when it returns to an area with good Wi-Fi signal.
3. For strong Wi-Fi signal to ensure stable connection, it is recommended to install Wi-Fi extenders to cover areas with
weak or no Wi-Fi signal.
7. Boundary Wire Basics
7.1 Pegging the Boundary Wire
Use the Boundary Wire Distance Gauge (20) to set the correct
distance between the wire and the border of your lawn (more than
26cm*).
* This is the recommended distance. The provided distance gauge
ensures proper installation.
If your neighbor also uses a Landroid
®
, keep a spacing of at least 1
metres between your Boundary Wire and your neighbors.
The Boundary Wire must outline the intended mowing
area exactly. Your Landroid
®
will become confused by extra bends
or coils of Boundary Wire that are not part of its mowing area (See
Fig. I). If there is excess Boundary Wire after the mowing area has
been outlined, cut it off and store this additional wire in a separate
location. It is important to leave the necessary length where it
connects to the Charging Base so it can be connected and still remain
buried.
I
H
Only suitable for iOS
10.0 or higher
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR106 SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR106 SI in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR106 SI

Worx WR106 SI Installation Guide - English - 19 pages

Worx WR106 SI Installation Guide - Dutch - 19 pages

Worx WR106 SI User Manual - Dutch - 21 pages

Worx WR106 SI Installation Guide - French - 19 pages

Worx WR106 SI User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info