723922
13
Zoom out
Zoom in
Previous page
1/20
Next page
Owner’s Manual of Lawn Mowing Robot EN
13
battery indication light remains lit, the update is complete.
NOTE: If the Landroid
®
is not inside the boundary wire, the error indication light will flash RED after the update. Please
refer to the manual for more information.
(11) Be sure to tightly and completely close the rubber protective USB port cover.
Method 2: Update via your smartphone. (For specific models only. Please check Technical Data & Declaration of Conformity for
information specific to each model.)
If your Landroid
®
is connected to your smartphone via the Landroid
®
App, you can check the software version. The App will
also notify you when new software version is available.
The manual included with your Landroid
®
is based on the default software at the time of production.Some new features/
functions in the new version may not exist in the manual. If you found some settings not in the manual, please visit www.
worxlandroid.com to download the latest manual.
9. Maintenance
Your Landroid
®
works hard and needs to be cleaned and checked from time to time. Some parts will require replacement
as they become worn. Never use your Landroid
®
with defective main switch.
Switch off the machine before carrying out any service or maintenance.
Here's how to take care of your Landroid
®
.
9.1 Keep it sharp
WARNING: Before cleaning, adjusting, or
replacing the Blades, turn your Landroid
®
OFF and
put on protective gloves.
WARNING: When fitting new blades, make sure
you replace ALL the blades. Always use new
screws when fitting blades. This is important to ensure
blade retention and balance the blade turning disc.
Failure to use new screws could cause serious injury.
The Landroid
®
does not cut grass like other mowers. Its Cutting
Blades (12) are razor sharp on 2 edges and rotate in both directions
for maximum cutting capacity (See Fig. L). Each blade of your
Landroid
®
has 2 cutting edges. The Blade Turning Disc will make
forward and reverse rotation at random to use both cutting
edges and minimize the frequency of replacing the blades. Each
cutting blade will last up to 2 months when it is programmed to
mow everyday. Always check to see if the Blades are chipped or
damaged and replace them if they are. When the cutting blades are dull and worn out, they should be replaced with the
spare blades provided with your Landroid
®
. Spare blades are also available at your nearest WORX retailer.
A. Replace the Blades
After some time, usually every season, your Landroid
®
s Blades
will need to be replaced. When replacing the Blades, make sure
to replace all of them at the same time. You can replace them with
one of the spare Blade kits and extra Blade screws supplied with
your Landroid
®
.
Before attempting to replace your Landroid
®
s Blades, turn the
power off and put on protective gloves and follow these steps:
1. Gently flip the Landroid
®
over.
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver (See Fig. M)
4. Firmly screw on the new Blades.
5. Refit the battery and the battery cover.
IMPORTANT: After screwing the Blade to the Blade
Disc, make sure the Blade is able to spin freely.
1
2
L
M
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worx WR106 SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worx WR106 SI in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worx WR106 SI

Worx WR106 SI Installation Guide - English - 19 pages

Worx WR106 SI Installation Guide - Dutch - 19 pages

Worx WR106 SI User Manual - Dutch - 21 pages

Worx WR106 SI Installation Guide - French - 19 pages

Worx WR106 SI User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info