724628
13
Zoom out
Zoom in
Previous page
1/19
Next page
AFTER SALES SUPPORT
1300 889 028 (toll free) e-mail: info.aldi@positecgroup.com
MODEL No.: CS207 • 63350 • 01/2019
25
AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free) MODEL No.: CS20V • 63350 • 01/2019
24
Circular Saw Cutting Tips
Always hold the main handle (7) with one hand and the front handle (8) with the
Never force the circular saw. Use continuous and light pressure. If cutting is
and squeeze the trigger switch (4). Allow the blade (21) to reach full speed,
re-enter the cut slowly and resume with cutting.
of the wood may have a tendency to tear and lift. Pushing the saw slowly will
Changing the Blade
WARNING:
the battery (27) is removed before making any adjustments.
1. P
2. Rotate the saw blade (21) by hand whilst depressing the spindle lock
button (20) until the blade locks (Fig S).
3. Whilst depressing the spindle lock button (20), turn the blade bolt
anti-clockwise using the supplied allen key (2) (Fig T).
4. R
5. Raise the lower blade guard (14) using the blade guard lever (13).
6. R
and away from the circular saw (Fig U)
NOTE: We recommend wearing gloves when removing the blade (21).
7. Clean the sa
will touch the blade.
Making a Pocket Cut
1. Adjust the depth of cut as required per previous instructions
2. Adjust the bevel setting to 0°.
3. R
so the blade (21) does not touch the work piece (Fig R).
4. With the blade (21) just clearing the work piece, start the motor by depressing
5. Always let the blade reach full speed (approximately 2 seconds) before you
begin to cut into the work piece.
6. Slowly lower the circular saw into the work piece, using the front of the base
resting on the work piece as a hinge point.
WARNING. As soon as the blade starts cutting the material, release the
lower blade guard lever (13).
7. Onc
forward direction to the end of the cut.
8. After completing your cut, release the trigger switch (4) and allow the blade (21)
to come to a complete stop.
Do not remove the circular saw from the work piece while the blade (21) is
moving.
NOTE: If the corners of your pocket cut are not
completely cut through, use a jigsaw or hand saw
.
R.
inner blade ange
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone CS20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone CS20V in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info