724628
14
Zoom out
Zoom in
Previous page
1/19
Next page
Dust extraction outlet / adapter
1. A vacuum or dust extraction appliance can be tted to the dust
extraction adapter (17) by inserting the hose into the port of the dust
extraction adapter (17). Ensure the t is secure.
2. To remove the dust extraction adapter (17), loosen the assembly screw
using a philips head screwdriver (not supplied) in an anticlockwise
direction. Remove the screw, and pull the dust extraction adapter (17)
out and away from the saw (Fig Y Z).
3. To re-attach, place the dust extraction adaptor (17) over and around
the dust extraction port recess area, lining up the screw hole on the
adapter and the hole on the recess. Insert the assembly screw and
tighten in a clockwise direction using a philips head screwdriver (not
supplied). Ensure the t is secure.
AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free) MODEL No.: CS20V • 63350 • 01/2019
AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free) MODEL No.: CS20V • 63350 • 01/2019
26 27
8. Mount the new saw blade onto the spindle (30) and against the inner
blade ange
9. R
tighten the blade bolt (24) using the supplied allen key (2) in a clock wise
direction (Fig W).
WARNING: The direction in which the blade rotates has to be
the same as the direction per the blade rotation indicator (3)
(Fig X).
10. Ensure that the spindle lock button (20) is released.
11. Before using the saw again, check that the safety devices are in good
working order.
IMPORTANT. After replacing the saw blade (21), make sure that the
saw blade (21) runs freely by turning the blade by hand.
12. Attach the battery pack (27) to the circular saw and run the saw under
no load to
check that it runs smoothly before using it to cut any material.
V.
S.
W.
T.
X.
U.
Y. Z.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone CS20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone CS20V in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info