724663
22
Zoom out
Zoom in
Previous page
1/28
Next page
24v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 51887 • 06/2016 • 51887
(toll free)
20
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
24v Lithium-ion Cordless Drill with Hammer Action
MODEL: №. 51887 • 06/2016 • 51887
Drill/driving plastics and plastic coated chipboard
• Usehighspeeddrill/driverbits
• Seedrill/drivingwoodbelow
Drill/driving wood
• Clampapieceofscrapwoodtothebackofyourworktoprevent
splintering.
Hammer drill operations.
• Wherepossible,useHighspeed.
• Selectthehammerpositiononthetorquecollar.
• Usedrillbitsspecicallyformasonaryapplications.
• Ensuretowearsafetyglasses.
All drill/driving operations
• Markothecentreoftheholeusingacentrepunchornail.
• Don’tforcethedrill/driver,letitworkatitsownpace
• Keepthedrill/driverbitsharp.
• Reducepressure,asthedrill/driverisabouttobreakthroughtheitem
being drill/drivered.
LED work light
When the unit is switched on, the LED work light (10) also comes on to
ensure better vision and to make working in dark areas more safe.
The working light goes out when the On/Off switch (9) is released.
CAUTION! LED is laser class 1!
Do not look directly into the laser as this may result in damage to the eyes.
Chuck replacement
The chucks of reversible drill/drivers are always fixed by a screw with a left-
hand thread. The screw, which is located in the centre of the chuck, must
be removed before the chuck can be removed. To remove the screw, turn it
in a clockwise direction. The chuck can now be removed by unscrewing it
anti-clockwise. If you have trouble removing the chuck take the drill/driver
to your nearest authorised service centre for chuck replacement.
CAUTION. Always ensure that the drill/driver is switched off and the battery
pack is removed before making any adjustments.
Operation
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone 24VHA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone 24VHA in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info