724663
21
Zoom out
Zoom in
Previous page
1/28
Next page
24v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 51887 • 06/2016 • 51887
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
24v Lithium-ion Cordless Drill with Hammer Action
MODEL: №. 51887 • 06/2016 • 51887
19
Inserting and removing bits
This drill/driver has a keyless chuck, which means
that a chuck (1) key is not needed to secure a bit
in the drill/driver.
Open the chuck (1) by unscrewing it in an
anti-clockwise direction, holding the drill/driver as
shown (Fig H).
Do this sufficiently enough to allow the drill/driver
bit to enter the jaws of the chuck.
Ensure the drill/driver bit is fully inserted, so that the chuck jaws grip the
straight section of the bit.
Rotate the chuck clock-wise until the jaws tighten on the drill/driver bit.
The collar of the chuck needs to be tightened firmly to ensure the drill/driver
bit is held securely.
To remove the drill/driver bit, rotate sharply the chuck in an anti-clockwise
direction, sufficiently enough to allow the drill/driver bit to be removed.
NOTE: This device is fitted with spindle lock and the chuck is a onehanded
operation.
Drill/driving
Drill/driving metals
• Alwaysclampsheetmetal.
• Supportthinmetalwithablockofwoodtoavoiddistortingit.
• Useapunchtomarkthecentreofthehole.
• Useasuitablelubricantforthematerialyouareworkingon,
USE: FOR:
Oil Steel
Turpentine or paraffin Aluminium
Do not lubricate Brass, copper or cast iron
Do not Lubricate Concrete based material
Inserting//Removing bits
H.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone 24VHA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone 24VHA in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info