724663

Workzone 24VHA Manual

20
Zoom out
Zoom in
Previous page
1/28
Next page
24v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 51887 • 06/2016 • 51887
(toll free)
18
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
24v Lithium-ion Cordless Drill with Hammer Action
MODEL: №. 51887 • 06/2016 • 51887
Forward/reverse switch
NOTE: You can only change the direction of rotation of the drill/driver using
the forward/reverse switch when the trigger is NOT depressed.
This switch will allow you to change the direction of the motor while the
trigger switch is not depressed.
Drill/driving uses the forward mode. The reverse mode is intended for the
removal of screws and assisting to remove jammed drill/driver bits.
Adjustable torque
This drill/driver is equipped with 18 torque settings plus 1 x drill/driver
setting and 1 x hammer setting, which are controlled by the torque collar
(2). All of the torque settings are clearly identified on the torque collar (2).
To adjust the torque setting you rotate the torque collar. The higher the
number, the higher the torque setting collar (2).
Controlling the torque allows for better control when using the drill/driver
on specific add screwing tasks and prevents over-fastening and over-
tightening.
For drill/driving, always use the drill/driver position
by aligning the drill/driver symbol with the
triangular indicator on the front face of the drill/
driver near the torque collar.
For setting the torque position, select a low setting
on the torque collar (2) and align the selected
symbol with the triangular indicator on the top
of the drill/driver.
Using the Hammer function
To select the hammer drill position, rotate the torque collar (2) around past
the drill symbol and align the hammer symbol with the indicator on the top
of the drill (Fig G). This will allow the drill to hammer during rotation of the
chuck when pressure is applied.
When fitting the drill bit, ensure to use a masonry drill bit or a drill bit
specifically designed for the material being drilled.
Forward/Reverse
G.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone 24VHA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone 24VHA in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info