697434

Worcester-Bosch GB162-80 Manual

56
Zoom out
Zoom in
Previous page
1/72
Next page
Display information
6720813171 (2016/05)56
e
[2/y/\|
e
[2/8/2|
e
Fault:
No feedback from the pump.
No Off
e
[3/a/\|
e
[2/6/4|
e
Fault:
The tacho signal from the fan has failed during the
operating phase.
No
4)
5)
Off
e
[3/c/\|
e
[2/1/7|
e
Fault:
No current of air after a certain time.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[3/f/\|
e
[2/7/3|
e
Operating phase:
The appliance has been switched off for a couple of
seconds, because it had been running without any
interruption for 24 hours. This is a safety check.
No
4)
5)
Off
e
[3/l/\|
e
[2/1/4|
e
Fault:
The tacho signal from the fan is not present during the
pre-operative or operating phase.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[3/p/\|
e
[2/1/6|
e
Fault:
The fan is running too slowly.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[3/y/\|
e
[2/1/5|
e
Fault:
The fan is running too fast.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/a/\|
e
[2/1/8|
e
Fault:
The flow temperature sensor has detected a flow
temperature of over 105 °C.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/c/\|
e
[2/2/4|
e
Fault:
There is no bridging cable between contacts 22 and 24 of
the UBA 3 contact strip.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/e/\|
e
[2/7/8|
e
Fault:
The sensor test has failed.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/f/\|
e
[2/1/9|
e
Fault:
The safety temperature sensor has detected a flow
temperature of over 105 °C.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/l/\|
e
[2/2/0|
e
Fault:
The contacts for the safety temperature sensor have
shorted or the safety temperature sensor has detected a
flow temperature of over 130 °C.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/p/\|
e
[2/2/1|
e
Fault:
The contacts for the safety temperature sensor have
shorted.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/u/\|
e
[2/2/2|
e
Fault:
The contacts for the safety temperature sensor have been
interrupted.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[4/y/\|
e
[2/2/3|
e
Fault:
The contacts for the safety temperature sensor have been
interrupted.
Yes
5)
6)
7)
8)
flashing
1Hz
No heating operation and no
DHW.
e
[5/h/\|
e
[2/6/8|
e
Operating phase:
Component test phase.
No Off
e
[6/a/\|
e
[2/2/7|
e
Fault:
The system has detected an insufficient ionisation current
during the ignition phase.
No
4)
5)
Off
Display codes
Display code
LED on
UBA 3 Other effectsz
Main
display
code
z
Sub
display
code
z Key to display code
Reset
requi-
red?
Table 24 Display codes
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Worcester-Bosch GB162-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch GB162-80 in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Worcester-Bosch GB162-80

Worcester-Bosch GB162-80 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info