Manual Worcester-Bosch Danesmoor FS (page 5 of 14) (English)

809312

Zoom out

Zoom in

1/14

FUEL

Your Danesmoor FS boiler is factory set to burn

28-second Kerosene fuel. This fuel is permitted for

use with a Conventional flue or Room sealed

balanced flue arrangements across all output ranges.

35-second Gas Oil can only be used on

conventional flue appliances which discharge at

more than 2 metres above ground level. Both the

12/18 and 18/25 may be used in conjunction with

Gas Oil on Conventional flue arrangements,

however the 12/18 model may only be used with

Gas Oil when commissioned to outputs of 15kW

and above. Advice should be sought from the

commissioning or Service engineer.

Conventional flue appliances which burn 35

second Gas Oil should terminate at a height of 2

metres or greater from the outside ground level.

Room sealed balanced flue appliances must not

be used in conjunction with 35 second Gas Oil.

SERIAL NUMBER

Your boiler serial number and model number

should always be quoted in any contact with

Worcester Heat Systems. This will help identify your

boiler accurately avoiding confusion and delays

when placing a service call or ordering spare parts.

The boiler serial number and model number are

printed on a data label which is located behind the

front white panel as shown in Fig. 1. To access this

data label you must remove the front white panel, as

shown in Fig. 4.

For Service Engineers there is a more

comprehensive data label on top of the appliances

control box underneath the top white panel. Please

make reference to the Installation and Servicing

manual to gain access.

Fig. 1. Data label location

DATA

LABEL

LOCATION

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Danesmoor FS in the language / languages: English as an attachment in your email.

The manual is 1.21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worcester-Bosch Danesmoor FS Manual

Product: