Manual Worcester-Bosch Danesmoor FS (page 6 of 14) (English)

809312

Zoom out

Zoom in

1/14

HOW TO START YOUR

BOILER

(See Fig. 2.)

(a) Turn on oil supply.

(b) Switch on the electrical mains supply to the boiler.

as a room thermostat, are on a high setting.

(d) Set the programmer to the correct time of day and position

the selectors to ON. The demand lamp in the control fascia

will light up.

(e) Turn the thermostat control knob to the desired position (See

Fig. 3: temperature control).

(f) Your boiler will now commence a start sequence, in which a

pre-ignition period of approximately 15 seconds is followed

by a supply of atomised oil being introduced into the

combustion chamber. Ignition then occurs, followed by a

post-ignition period of approximately 20 seconds.

(g) Your boiler is now in a steady run condition and will remain

so until the water temperature reaches the temperature set on

the control thermostat. At this point the burner will stop and

the boiler will shut down. The sequence will continue until

the boiler is programmed for a period shutdown.

Fig. 2. Control Fascia

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Worcester-Bosch Danesmoor FS in the language / languages: English as an attachment in your email.

The manual is 1.21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Worcester-Bosch Danesmoor FS Manual

Product: