Manual WOLF-Garten UV 40 H (page 13 of 32) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish)

638385

Zoom out

Zoom in

1/32

Maintenance

General

1 Caution! Rotating blades

Before all maintenance and cleaning tasks:

z Remove the sparking plug lead.

z Take care not to grab running cutters.

z For safety reasons, replace any worn or damaged parts.

When replacing, follow the instructions for installation

z Check all the visible fastening bolts and nuts regularly to be

sure they are snug and tighten them.

z Only use spare parts made by WOLF; otherwise you do not

have a guarantee that your scarifi er meets safety regulations.

Cleaning

Scarifier

z Always clean the scarifier after each use with a handbrush.

z Never spray the scarifier with water.

z Turn the scarifier on its side in accordance with the illustration

Air filter

1. Open the cover in accordance with the illustration .

2. Remove the air filter and check carefully for damage, if neces-

sary replace it.

3. Tap the air filter carefully to clean it.

– To prevent damage, the air filter should not be brushed

clean or blown out with compressed air.

4. Replace the air filter and close the cover .

Sparking plug

z Dirty sparking plugs reduce the power of the engine.

1. Clean the sparking plug with a wire brush.

2. Make sure that the electrode gap is correct . If necessary,

adjust the gap by carefully bending the electrode.

Changing the engine oil

3 Notes:

z Change the oil for the first time after 20 operating hours.

z Then change the oil every 100 operating hours, at the

end of the scarifying season at the latest.

z When using the machine in very heavy applications or in

dusty conditions, the oil should be changed more often.

z The oil should be drained when the engine is hot and the

fuel tank is empty.

1. Open the oil filling spout.

2. Tilt the scarifier slowly to the front and allow the oil to flow into

a suitable container.

3. Close the oil filling spout again.

z Please dispose of the old oil in accordance with the local re-

gulations.

z Old oil must not be allowed to enter the ground and must not

be disposed of in the household waste.

Tilling blade wear

In order to compensate for signifi cantly worn tilling blades (1),

the tilling depth can be increased.

1 Caution! Sharp blades and springs.

Protective gloves are to be worn for this work.

1. Set the change lever in work/tilling) position (2).

2. Jack the tiller up as shown in ill .

3. Using two open-jawed 13 mm spanners, loosen the front hex.

nut .

4. Turn the front hex. nut until it is fl ush with the end of the threa-

ded bolt .

5. Firmly tighten the rear hex. nut against the front hex. nut .

3 The blades must be replaced when the wear has rea-

ched the wear mark (2).

Storage in winter

z Drain the fuel tank.

z Drain the carburettor.

– This can be done by starting the engine and allowing it to

run until it stops of its own accord.

z Clean the scarifier thoroughly.

z Change the oil.

z Preserve the engine:

– Unscrew the sparking plug and pour one dessert spoon of

engine oil into the sparking plug opening

– Pull the starting cord slowly all the way (oil distribution in the

cylinder)

– Screw the sparking plug back in position (do not replace the

sparking plug lead)

z Store the scarifier in a cool and dry location.

z The scarifier should be checked by a WOLF customer service

workshop in the autumn.

Spare parts

Ordering Number Designation of the item Description of the item

3635 068 TK 40 Collection bag

3640 098 UV-EFF 40 Replacement springs (16 units)

3640 097 UV-EV 40 Replacement cutters (17 units)

4180 091 VO-4T Special 4 stroke oil

2098 323 Air filter (UV 40 H)

2089 300 Air filter (UV 35 H)

2095 306 BPR 6 ES (NGK) Sparking plug (UV 40 H)

2058 305 Champion RJ 19 LM Sparking plug (UV 35 B)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten UV 40 H in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten UV 40 H Manual

Product: