690821

Wmf Lumero - 12360011 Manual

12
Zoom out
Zoom in
Previous page
1/19
Next page
22 23
EN
A
Water tank cover G Steam nozzle control panel with light ring
(white/red)
B
Removable water tank
G1
Steam generation
C
Cup warmer / Cup tray
G2
Preheat steam
D
Control panel
G3
Steam nozzle off
D1
Button to pour out a cup
D1.1 Built-in operating light (white/
red/blue)
G4
Output hot water
D2
Preparation of 2 espressos
D2.1 Built-in operating light (white/
red)
H Steam nozzle
E
Strainer holder I Drip tray grid
F
Strainer J Collection tray for drip water
F1
1 cup strainer K Floater
F2
2 cup strainer L On/off button
F3
Strainer pad M Measuring spoon/compactor
Meaning of light rings
Red light: White light: Blue light:
Heating mode
Heating mode for milk
frother
Standby mode
Tank empty
Flashing white
Descaling
Descaling alarm
Flashing blue and
white
Cool-down phase
after milk frothing
Flashing red
Sleep Mode
> 30 min.
Getting started
Before using for the first time, clean all the accessories with warm water and gentle washing-up liquid
and dry.
Then rinse as follows:
1. Connect the device to a mains socket (1).
2. Take off the cover (A) and remove the water tank (B) (2).
3. Fill the water tank with drinking water at room temperature to the MAX marking and replace it on
the device. The tank must be correctly positioned. Replace the lid.
4. If you want to have an Espresso please assembly the collection tray for drip water first to ensure
that the right distance between the cup and the portafilter is given. Therefore remove the drip
tray grid (I) and take the collection tray for drip water (J) out of the device. Remove th drip tray
bracket, turn it upside down and put it back in the recess. Put the collection tray for drip water (J)
on the drip tray bracket and attach the drip tray grid (I). The collection tray for drip water (J) does
not have to be assembeled for cappuccino cups.
5. Make sure that the selector switch (G) is set to the O position (G3 ->
).
6. Press the On/Off button (L ->
) to switch the device on. The device runs self-diagnostics.
7. The cup selection buttons (D1/D2 ->
) light up red, which means that the device is heating
up: when the light rings switch from red to white, the device is ready to use.
8. Place a vessel with a capacity of at least 100 ml underneath the hot water/steam outlet (H).
9. Adjust the hot water output knob (G4 ->
) and allow approx. 100 ml water to run out; then reset
the knob to G3 =
.
10. Repeat steps 5-8 until the water tank is empty.
11. Then prepare 1-2 espressos or 1-2 cappuccinos. Do not drink them.
Carry out steps 1-7 of the chapter on “Preparing espresso”.
Permanent device settings:
This machine has various default settings for water hardness, coffee temperature and volume of water
per cup. These settings can be adjusted individually. Proceed as follows to access the programme menu
for permanent settings:
Activating the programme menu:
Proceed as follows to access the programme menu for water hardness and coffee temperature:
1. On/Off button ->
2. The knob ->
is in Position 0
3. Press and hold the 1-cup button ->
and 2-cup button -> at the same time
4. Now press the On/Off button ->
5. The 1-cup button -> lights blue and the 2-cup button -> lights red.
Note: If you do not press any buttons for 10 seconds, the device automatically exits programme menu
and starts the heating phase.
Setting the water hardness
Water hardness levels vary by region, so you should find out what yours is before adjusting the device.
The water hardness level corresponds to the following machine settings:
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

wmf-lumero---12360011

Reset search

  • Why is the 1cup button of lumero WMF blinking color blue? What is the problem? Submitted on 30-1-2022 at 18:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf Lumero - 12360011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf Lumero - 12360011 in the language / languages: English, German as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wmf Lumero - 12360011

Wmf Lumero - 12360011 User Manual - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info