712210

Wmf Aroma Thermo to go Manual

16
Zoom out
Zoom in
Previous page
1/72
Next page
16
Notes on the Cromargan® thermal jug and thermal beaker
The thermal jug and thermal beaker best keep contents warm when filled to the maximum level. The
time the content is kept warm may be reduced significantly if the jug/beaker is only partially filled or
almost empty.
Note: It is best to rinse the thermal jug/beaker with hot water before use. To seal, turn the lid in a
clockwise direction until it sits snugly on the thermal jug/beaker. To pour, press the pour button on the
lid. To open the thermal jug/beaker, turn the lid slightly counter-clockwise. The thermal jug and ther-
mal beaker are made of double-walled Cromargan® and therefore completely shatter-proof. However,
they should be protected against mechanical stresses nevertheless. Rinse out the thermal jug/beaker
regularly. If iron particles from water accumulate on the Cromargan® surface, they can cause pitting
at those points. These deposits must therefore be removed immediately with a stainless steel cleanser.
Cleaning and care
Cleaning
Unplug the mains plug and allow the appliance to cool down.
Do not immerse the appliance in water. Outer surfaces can be cleaned using a damp cloth and a little
washing-up liquid.
Do not use harsh or abrasive cleaning agents.
The filter (3), thermal jug (8) and thermal beaker (9) can be cleaned under running water. Alternatively,
you can also clean them in the dishwasher.
Scale indicator
Limescale deposits extend brewing times and lower the quality of your coffee. They also lead to energy
losses and impair the service life of the appliance. The automatic scale indicator determines when
it is time for descaling. Depending on coffee consumption and the set water hardness, you may be
prompted to descale every 4-6 weeks. This is indicated when the descaling symbol (
) is displayed
permanently.
Setting the water hardness
Your appliance has an automatic scale indicator. To prevent too much limescale building up, the appli-
ance is set for very hard water by default. Ask the responsible waterworks or local authorities about
the hardness of your tap water. Change the default setting if the water hardness is less than 21°dH.
You will then not be prompted to descale as often as before. To this end, press and hold the descaling
button (the - button) for about 3 seconds until the display (6) shows the currently set water hardness
(H1, H2, H3 or H4) and the descaling symbol (
). Press the + or - button to adjust the water hardness.
Confirm the setting by pressing the timer button (
).
Hardness range Hardness
1 Soft 0-7° dH
2 Medium >7-14° dH
3 Hard >14-21° dH
4 Very hard >21° dH
1° dH corresponds to about 0.18 mmol/l Ca and Mg ions
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf Aroma Thermo to go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf Aroma Thermo to go in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info