727502

Whynter ARC-148MHP Manual

11
Zoom out
Zoom in
Previous page
1/19
Next page
11
INSTALLATION
WINDOW KIT INSTALLATION IN A DOUBLE-HUNG WINDOW
1. Open window or sliding door for approxi-
mately 5”
2. Cut the foam seal A and B (adhesive
type) to the proper length and attach it to
the bottom of the window. Fig. 5a.
3. Adjust the length of the window slide
bars to the same length and width of the
opening of the window. Cut the window
piece if necessary to fit the length of your
window. Never cut into the exhaust hose
cut-out on the window slider kit. Fig. 5b.
4. Close the window on the window slide
bars. For long term installation, you may
screw the window kit into your window
frame using the security bracket. Fig. 5c.
5. Cut the foam seal C (non-adhesive) to
the length and seal the open gap between
the top window sash and outer window
sash. Fig. 5d.
WINDOW KIT INSTALLATION IN A SLIDING WINDOW/DOOR
1. Open window or sliding door for approx-
imately 5”
2. Cut the foam seal (adhesive type) to
the proper length and attach it to the bot-
tom of the door / window. Fig. 6a.
3. Adjust the length of the window bars to
the same length and width of the opening
of the window. Cut the window piece if nec-
essary to fit the length of your window.
Never cut into the exhaust hose cut-out on
the window slider kit. Fig. 6b.
4. Close the door/ window on the window
slide bars. For long term installation, you
may screw the window kit into your window
frame using the security bracket. Fig. 6c.
5. Cut the foam seal C (non-adhesive) to
the length and seal the open gap between
the top window sash and outer window
sash. Fig. 6d.
Foam seal A
(adhesive type)
Foam seal B (adhesive type)
Security bracket
Screws
Foam seal C
(non-adhesive type)
Foam seal A
(adhesive type)
Foam seal B
(adhesive type)
Security bracket
Screws Foam seal C
(non-adhesive
type)
EXHAUST AND INTAKE HOSE INSTALLATION TO THE
WINDOW KIT
1. Make sure that window slider kit is securely installed.
2. Move the unit to the window, extend the exhaust hose,
align the hose connector and snap it into the window kit.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter ARC-148MHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-148MHP in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info