727502

Whynter ARC-148MHP Manual

10
Zoom out
Zoom in
Previous page
1/19
Next page
10
INSTALLATION
LOCATION
The air conditioner should be placed on a hard and level surface strong enough to support the unit. The unit has
casters and it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not
attempt to roll the unit over objects. Never place any obstacles around the air inlet or outlet and allow at least 20" of
clearance for efficient air-conditioning.
EXHAUST HOSE INSTALLATION
When using the air conditioner in COOL or HEAT mode,
hot air must be exhausted out of the room to complete
the air exchange of the condenser. When the unit is
operating in DRY or FAN only mode, installation of the
exhaust hose is optional.
1. Snap the hose connector to the unit onto one end
of the exhaust hose and then snap the hose
connector to the window onto the other end. Fig. 1
2. Line-up the hose connector hook onto the back of
the unit and slide into the hole seat. See Fig. 2
3. Only extend the exhaust hose to the necessary
length keeping it as short and straight as possible.
WINDOW KIT INSTALLATION
The window kit has been designed to fit most standard vertical and horizontal windows. However, it may be
necessary to modify the installation procedures to accommodate your window. Please refer to Fig. 3a and Fig. 3b
for minimum and maximum window openings. If your window opening is less than the mentioned minimum length
of the window slider kit, the window slider kit can be cut to fit the window opening. Never cut into the exhaust hose
cut-out on the window slider kit.
If your window opening is larger than the maximum length of the window slider kit, additional material will be
needed to cover the open space such as, Plexiglas, PVC plastic, ply wood, etc. Alternately, an additional window
slider kit can be purchased to be used in combination with the included kit.
NOTE: When using the window slider kit on a window or sliding door, additional security measures may be
needed.
The window slide bars can be fixed with the clear plastic bolt. Fig. 4.
Fig. 3a Fig. 4
Fig. 3b
Fig. 1
Fig. 2
Hook
Hole Seat
Clear plastic
plug
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter ARC-148MHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-148MHP in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info