Manual Whynter ARC-148MHP (page 9 of 19) (English)

727502

Zoom out

Zoom in

1/19

INSTALLATION

WARNING: NEVER OPERATE THE AIR CONDITIONER

WITHOUT THE AIR FILTER

AIR FILTERS

• Silvershield Pre-filter

This portable air conditioner is equipped with a

Silvershield pre-filter, which removes large particles such as

dust, pet hair and dander. This pre-filter can be removed for

cleaning by pulling the filter frame back and out. This pre-filter

washable and does not need to be replaced.

• 3M™ Antimicrobial High Air Flow Filter

This portable air conditioner comes with the 3M™ Antimicrobial

High Air Flow Filter which is designed to remove particles such

as dust, pet hair and dander, antimicrobial agent helps inhibit

the growth of mold and mildew, and the micro-structured elec-

trostatically charged filtration media traps and retains particles.

The 3M Filter is pre-installed.

Note: The 3M Filter should be replaced every 2-3 months de-

pending on usage. Please contact support@whynter.com for

retail sales information.

WATER DRAINAGE

The dehumidifying capacity of this unit is 71 pints per day. The patented self-evaporating function of the

ARC-148MHP unit fully exhausts all condensation automatically in most environments when humidity is less than

70%. Areas with more than 70% humidity, the self-evaporating function can still exhaust about 98% of the

moisture and the remaining 2% of moisture will be collected in the water tank of the air conditioner.

When the water reservoir reaches its maximum level, the unit will beep 8 times and the digital display will show

P1. When the unit displays P1, all operation modes will be disabled temporarily, while the fan continuously run-

ning. The P1 code will disappear when the water is completely drained.

• Manual drainage (Fig. 1a)

In AUTO, COOL, DRY, or HEAT mode, carefully move the unit to a drain location or position a flat container,

dish or optional drain bucket accessory (sold separately) under the drain area of the lower drain port. Remove

the bottom drain plug and let the water drain. Replace the drain plug and plug in to resume operation.

• Continuous drainage (Fig. 1b)

In AUTO, COOL or DRY mode, remove the upper drain plug from the back of the unit and install the drain hose.

Place the open end of the hose to a drain area. This method is recommended if uninterrupted operation is de-

sired.

• Heat pump drainage (Fig. 1c)

This unit has a condensate pump feature that can pump out (and up) water through the included drain hose for

continuous water removal during HEAT Mode. Remove the heat pump drain plug from the back of the unit and

install the drain hose. Place the open end of the hose to a drain area.

NOTE: The condensate pump will only engage during Heat mode and will not work in any other modes.

Bottom drain

plug for Manual

Drainage

Silvershield Filter

3M Filter

Attach drain

hose for con-

tinuous water

removal during

Heat Mode

Fig. 1a Fig. 1b Fig. 1c

Attach drain

hose for

continuous

water re-

moval dur-

ing Cool or

Dry Mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-148MHP in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whynter ARC-148MHP Manual

Product: