515832
8
Zoom out
Zoom in
Previous page
1/18
Next page
29
Timer mode
It is convenient to set the timer on with TIMER button when you go out in
the morning to achieve a comfortable room temperature at the time you get
home. You can also set timer off at night to enjoy a good sleep.
Timer setting
Set a switch-on timer when the appliance is off.
Set a switch-off timer during operation.
As time goes by, the LCD on the remote control only displays the
remaining time, not the set temperature.
The previous set time is stored and the next set time begins with the
previous setting.
On- timer and off-timer can not be set at the same time.
The room may not reach your desired temperature within the preset
time; this depends on the size of the room.
1. E.g. setting the next operation after 9.5 hours
Set the desired operating mode, temperature and indoor fan speed,
then press the TIMER button (1); “h” will flash on the LCD.
2. E.g. setting the next operation after 9.5 hours
Point the remote control at the signal receiver of the indoor unit, and
press the or button (2) when “h” flashes. Choose the time you
desire, then press the TIMER button.
A “beep” can be heard:
Timer indicator on the indoor unit lights up.
“h” stops flashing.
Important: Press the TIMER button, “h” flashes on the LCD,
then you can set the time. Each time the or button is
pressed:
If the desired time is within 10 hours, the set time increases or
decreases by 0.5 hour.
If the desired time is beyond 10 hours, the set time increases or
decreases by 1 hour.
The time that can be set ranges between 0.5 and 24 hours.
3. E.g. cancelling the switch-on time after 9.5 hours
To cancel the set time: press the TIMER button again, a “beep” can be
heard and the timer indicator on the indoor unit lights off.
JET mode
JET mode is used to start or stop fast cooling.
Fast cooling operates at high fan speed, changing the set temperature
automatically to 18°C.
JET mode can be set when the appliance is in operation or energized.
In JET mode, you can set airflow direction and timer. If you want to quit
from JET mode, press any-JET, MODE, FAN, ON/OFF or
TEMPERATURE SETTING button, the display will return to the original
mode.
Note:
SLEEP and 6th Sense buttons are not available in JET mode.
JET button is ineffective in HEATING mode.
SWING
MODE
SLEEP
TIM E
FAN
hr
High
Low
1
2
2
hr
Hig h
Low
hr
Hig h
Low
Hig h
Low
SW I NG
MODE
SLEEP
TI ME
FA N
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AMD 002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AMD 002 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AMD 002

Whirlpool AMD 002 User Manual - German - 18 pages

Whirlpool AMD 002 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info