515832
6
Zoom out
Zoom in
Previous page
1/18
Next page
27
OPERATION INSTRUCTIONS
Operating modes
1. Selecting mode
Each time
MODE
button is pressed, the operation mode is changed in
sequence:
COOLING DRY FANONLY HEATING
IMPORTANT:
Heating mode is NOT available for cooling only air conditioner.
2. “FAN” mode
Each time the “FAN” button is pressed, the fan speed is changed in
sequence:
AUTO HIGH MEDIUM LOW
IMPORTANT:
In “FAN ONLY” mode, only “High”, ”Medium” and “Low” are available.
In “DRY” mode, airflow is set at “Low” automatically, “FAN” button is
ineffective in this case.
3. Setting temperature
Press once to raise temperature setting by 1°C
Press once to lower temperature setting by 1°C
Range of available set temperature:
*HEATING, COOLING 18°C ~ 32°C
DRY room temperature ± 2°C
FAN ONLY unable to set
*NOTE: Heating mode is NOT available for cooling only models.
4. Turning on
Press button, when the appliance receives the signal, the RUN
indicator of the indoor unit lights up.
SWING, 6th Sense, TIMER, SLEEP and JET operation modes will be
specified in the following pages.
IMPORTANT:
Changing modes during operation, sometimes the unit does not
response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning.
After 2-5 minutes, the air flow will be discharged until temperature
of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
Airflow direction control
5. Airflow direction control
Vertical airflow is automatically adjusted to a certain angle in accordance
with the operation mode after turning on the unit.
The direction of airflow can also be adjusted to your own requirement by
pressing the “SWING” button of the remote control.
*Heating mode is only available for heat pump models.
Vertical airflow control (using the remote control)
Use the remote control to set the flow angles.
Swinging airflow.
Pressing the “SWING” button once, the vertical adjustment louver will swing up and down automatically.
Desired airflow direction.
Press the “SWING” button again when the louvers swing to a suitable angle as desired.
operation mode direction of airflow
COOLING, DRY
horizontal
*HEATING, FAN ONLY
downward
SWING
MO DE
SLEEP
TI M E
FAN
hr
High
low
1
3
4
5
2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AMD 002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AMD 002 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AMD 002

Whirlpool AMD 002 User Manual - German - 18 pages

Whirlpool AMD 002 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info