515832
7
Zoom out
Zoom in
Previous page
1/18
Next page
28
6th Sense mode
Horizontal airflow control (with hands)
Turn the control rods of the horizontal adjustment louvers to change horizontal
air flow as shown.
Note: The shape of the unit may look different from that of the air
conditioner you have selected.
ù
Important:
Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens,
first turn off the unit and cut off the power supply, then restore the power supply again.
It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY
mode to prevent condensed water from dripping.
Control rods of horizontal
adjustment louver
Pressing the 6th Sense button, the unit enters fuzzy logic operation directly regardless whether the unit is on or off. In
this mode, temperature and fan speed are automatically set according to the actual room temperature.
Operation mode and temperature are determined by indoor temperature
Heat pump models
Indoor temperature
Operation
mode
Target
temperature
21°C or below HEATING 22°C
21°C - 26°C DRY
Room temperature
decreases 1.5°C after
operating for 3 minutes
Over 26 COOLING 26°C
Cooling only models
Indoor temperature
Operation
mode
Target
temperature
26°C or below DRY
Room temperature
decreases 1.5°C after
operating for 3 minutes
Over 26 COOLING 26°C
Important: 6th Sense button is ineffective in JET mode.
Note: Temperature, airflow and direction are controlled automatically in 6th Sense mode. However, a
decrease or rise of up to 2°C can be set with the remote control if you still feel uncomfortable.
A decrease or increase up to 2°C can be set in 6th Sense mode
Your feeling Button Adjustment procedure
Slightly warmer
A decrease up to 2°C can be set
Press once to lower the set
temp by 1°C
Press twice to lower the set
temp by 2°C
Slightly cooler
A rise up to 2°C can be set
Press once to raise the set
temp by 1°C
Press twice to raise the set
temp by 2°C
Uncomfortable because of unsuitable air flow
volume.
Indoor fan speed alternates among
High, Medium and Low each time
this button is pressed.
Uncomfortable because of unsuitable flow
direction.
Press it once, the vertical
adjustment louver swings to change
vertical airflow direction. Press it
again, swings stops. For horizontal
airflow direction, please refer to
the previous page for details.
SWING
MODE
SLEEP
TI M E
FAN
High
low
FAN
FAN
GNIWS
GNIWS
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AMD 002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AMD 002 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AMD 002

Whirlpool AMD 002 User Manual - German - 18 pages

Whirlpool AMD 002 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info