813317

Westfire WF35 Manual

11
Zoom out
Zoom in
Previous page
1/32
Next page
WESTFIRE · WF35 WESTFIRE · WF35
11
UK
Westfire Insulated chambers
The WESTFIRE UNIQ 35 stove is lined with vermiculite heat deflection panels and baffles, these panels are
designed to ensure the maximum efficiency and are an integral part of the clean burn process of the stove.
These baffles should not be removed other than for cleaning the stove. Any panels showing significant ware
should be replaced.
Connection to chimney
The WESTFIRE UNIQ 35 stoves are factory set up with a top flue outlet only; the flue outlet can be altered on the
inset model by removing the collar and rotating 180 degrees and re bolting. This will give a collar which is now at
a 45 degree angle. Care should be taken to ensure an airtight fit when refitting collar. This collar allows connec-
tion to either a stainless steel chimney liner or a prefabricated factory made insulated metal chimney. Westfire DO
NOT recommend installation of this appliance directly into a masonry chimney.
Commissioning and handover
On completion of the installation allow a suitable period of time for any fire cement and mortar to dry out, a
small fire may be lit to check that smoke and fumes are taken from the stove up the chimney and emitted safely
into the atmosphere. Do not run at full output for at least 24 hours.
On completion of the installation and commissioning ensure that the operating instructions for the stove are left
with the customer. Ensure to advise the customer on the correct use of the appliance with the fuels likely to be
used on the stove and notify them to use only the recommended fuels for the stove. Advise the user what to do
should smoke or fumes be emitted from the stove. The customer should be warned to use a fireguard to BS 6539
in the presence of children, aged and/or infirm persons.
OPERATION & MANTANENCE OF YOUR APPLIANCE
Congratulations on your purchase of your new Uniq 35 new multi-fuel stove from Westfire ApS. The Westfire
UNIQ 35 is constructed in steel with a vermiculite insulated chamber.
Please read this manual carefully in order to ensure that you get maximum enjoyment from your new stove and
to prevent any problems. Please note that “all local regulations, including those referring to national and Euro-
pean Standards, need to be complied with when installing this appliance”.
Warning
CO Alarm: Your installer should have fitted a CO alarm in the same room as the appliance. If the alarm sounds
unexpectedly, follow the instructions given under “Warning Note” above . Use a fireguard in the presence of
children, and old and/or infirm people. The fireguard should be manufactured in accordance with BS 8423:2002,
Fireguards for use with solid fuel appliances.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Westfire WF35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Westfire WF35 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info