50963

Weightec 348 Manual

32
Zoom out
Zoom in
Previous page
1/53
Next page
9.3 DATA STRING : SETPOINT REQUEST with:
see table: 5 7 6
on page: 43 45 44
digit: 1 2 3 4 5 6 7 8 9 10 11 12
data: X # S W W W W W W @ A CR
B
o D
H
In the continuous sending mode (call nr. 0) a requested setpoint string will be transmitted one time only.
Thereafter the previous sending mode will be continued.
Specifications per digit:
Digit 1 X = Identification / call number, settable with switch 61 … 64. See table 5 on page 43
Nr. 0 ( =@ ) is always sending continuously
Digit 2 # = Code # identifies this string as a transmission from a 348.
In a received string (commands and questions) this may be a ! or a ?
Digit 3 S = This string contains the : Setpoint weight value, without decimal point
and with an extra (x10) decade: 10
-1
Digit 4 t/m 9 W = Setpoint value : 10
4
, 10
3
, 10
2
, 10
1
, 1, 10
-1
, without decimal *)
Digit 10 = Executive code and status (on / off) of the setpoint output. See table 7 on page 45
Digit 11 = Setpoint number (ASCII) : A, B, D or H (= 1, 2, 3 of 4). See table 6 on page 44
Digit 12 = Carriage Return
*) The comparison of the setpoint values against the actual (net) weight value is internal 10 x more accurate as
the value of the scale division itself, so: 1 : 150,000.
Therefore setpoint values should be sent with 10 x higher accuracy, by adding one extra decade to the right
of the setpoint value. Accuracy will be than: (10
-1
) = 1/10
e
scale division.
The accuracy of dosing may be controlled very precise with this feature.
Example:
At a weighing scale with 0.1 kg divisions, a required setpoint value of 50.0 kg should sent in (x 10) as 005000.
That means 5000 x 0.01 kg = 50.00 kg, and selectable per 0.01 kg.
9.4 DATA STRING : SYSTEM INFO REQUEST with:
digit: 1 2 3 4 5 6 7 8 9 10 11 12
data: # H + . T T T . V V V CR
In the continuous sending mode (call nr. 0) a requested setpoint string will be transmitted one time only.
Thereafter the previous sending mode will be continued.
In this string no call (identification) number is sent.
Specifications per digit:
Digit 2 H = Code H identifies this string as a transmission of the internal temperature and
actual voltage of the loadcell excitation. Values are without decimal point.
Digit 3 +/- = + of - sign of the indicated temperature value
Digit 5, 6, 7 T = Temperature internal in °C per 0,1° ( f.e. 412 = 41,2° C)
Digit 9, 10, 11 V = Actual excitation voltage of the loadcells in VAC per 0,01V ( f.e. 562 = 5,62 VAC)
Manual 348-2 V 3.1 Page 32 01-06-2007
X ? see digit 11 CR
X ? H CR
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weightec 348 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weightec 348 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weightec 348

Weightec 348 User Manual - Dutch - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info