805501

Watts WFHC-MASTER H and C-RF 6 ZONES Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
6
User Program Edition:
Use (◄) & (►) keys to slide the blinking cursor position in the day and modify or correct easily the
program.
When the displayed day is correct press (OK) to jump and copy the daily program to the following
day.
When you press (OK) on day “7” you will come back to the top menu.
Now your program is created, it will be followed in if you select it for a zone.
6. Installation Menu
First of all to enter in the parameters menu, go to the Comfort mode, press once and maintain
the (Ok) key then press on the same time on the (◄) key. The following screen with the first
parameter must appear:
How to change a parameter value?
Once the parameter is displayed, press the (OK) key to edit the value, then you can adjust it
with (-) or (+) keys. Press (OK) or wait few seconds to valid your adjustments.
How to exit the installer menu?
To exit the parameter menu, go to the parameter “End” and press (OK).
Names
Description
Default setting & Other possibility
Type of user interface:
ProG: For complete weekly
programmable interface
EASY: For simple interface.
Alarm sound:
If a zone is in Lost Thermostat
Reception Alarm.
Buzz: Alarm sound activated
No: Function deactivated
Actuator type:
You could choose the actuators
managed by your system.
NC: Normally closed actuator
NO: Normally open actuator
Actuator Exercise
Select ACtU to perform a 5 minute
actuator exercise each 12h00 only on
the zones that have not been heating
since 24 Hours.
NO: function deactivated.
Actu: Function activated
The (+) key sets
temperature at the current
blinking program hour
The (-) key sets
temperature at the current
blinking program hour
Day
Hour at the
cursor position
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts WFHC-MASTER H and C-RF 6 ZONES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts WFHC-MASTER H and C-RF 6 ZONES in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info