Manual Wanders Ruby (page 39 of 64) (English, German, Dutch, French)

694500

Zoom out

Zoom in

1/64

Installation of channel casing for standing version (optional OND.RU.0310)

1. Place the stove and base as described on page 38.

2. Make sure the stove is standing or hanging directly under the chimney.

3. Connect the spacer (E) to the stove with 2 bolts (M5 recessed head)

4. Remove the spacing strip (A), this only needs to be used for the hanging version.

5. Place the channel casing (B) on to the holder and attach it to the wall with 4 screws.

6. Install the chimney.

7. Install the sliding element (C) and attach it to the ceiling with 4 screws.

8. Hang the face plate (D) in the casing.

Repairs

Replacing glass

1. Open the door

2. Remove the 6 screws on the inside of the door

3. Remove the 2 glass holders

4. Carefully take the glass out of the door

5. Check to see whether the strap in the door is not damaged and

that it is connected. If not, secure the strap with heat-resistant

sealant or replace it entirely.

6. Put in the new glass, beware of sharp edges on the glass

7. Put the various parts back in place

Replacing interior combustion chamber

Remove panels from stove in the following order:

1. You can choose to leave the ba e plate (A) in its place, but we advise you to remove it in order to prevent

damage

Check to see whether the strap in the door is not damaged and

that it is connected. If not, secure the strap with heat-resistant

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Ruby in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wanders Ruby Manual

Product: