694500
38
Zoom out
Zoom in
Previous page
1/64
Next page
38
GB
5. Mount the stove on to the bracket and connect the stove to the bracket with 2 bolts (M5 recessed head).
6. Carefully take the side panels out of the box.
7. Hang the side panels on the stove. These panels can be adjusted with 2 screws in the suspension.
8. Place the glass plate on to the stove.
9. Now install your smoke-gas discharge.
Standing version (on base OND.RU.0320):
1. Check the packaging, and report any visible damages.
2. There are 4 di erent boxes for installation (1x the stove + 1x the side panels + 1x the glass plate + 1x the base)
3. Take the stove out of the box (mind your back)
4. Take the wall bracket for the stove out and put it away, you won’t be needing it.
5. Carefully place the stove on its back.
6. Take the base out of the box.
7. Install the base under the stove with six M6 bolts.
8. Carefully place the stove upright and place it directly under the chimney.
9. Take the side panels out of the box and  t them on to the stove. These can be adjusted with 2 screws in the
suspension (see  gure on page 38 ‘Hanging version point 7)
10. Carefully take the glass plate out of the packaging and place the glass place on to the stove.
11. Now install your smoke-gas discharge.
Installation of channel casing for hanging version (optional OND.RU.0310)
1. Place the stove and base as described on page 38.
2. Make sure the stove is standing or hanging directly under the chimney.
3. Install the spacing strip (A) to the wall and make sure the strip is supported by the wall bracket.
4. Hang the channel casing (B) in the spacing strip (A)
5. Install the chimney.
6. Install the sliding element (C) and attach it to the ceiling with 4 screws.
7. Hang the face plate (D) in the casing.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Ruby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Ruby in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info