694500

Wanders Ruby Manual

37
Zoom out
Zoom in
Previous page
1/64
Next page
37
GB
must be covered with  reproof materials all around (about 80 cm). Pay also attention to joisted  oor layers and
any electric wiring.
5. Keep a distance of at least 50 cm (in all directions) between the stove and supporting steel construction parts.
6. Shield o all combustible materials within a radius of 100 cm from the stove openings with non-combustible
materials.
7. Never cover the chimney breast with combustible material (e.g. paper covering).
8. The wall behind the stove must consist of, or be insulated with,  re-proof materials. The insulation material
must resist a temperature of 700 °C and have a density of 80 kg/m3. Please see for insulation materials table
page 41).
Installation
The Ruby is tested in accordance with the international EN 13240 standardization, and has an extra additional
standardization for optimally environment-friendly heating devices related to  ue gases. The stove can be
connected to a  ue tube to which several stoves are connected. The  ue tube has a diameter of 150 mm.
Supply of combustion air
The stove must have enough supply of fresh combustion air. If necessary, make an extra air supply opening as
close to the stove as possible to avoid draught. An extra opening for air supply is always required if:
• the space has a heat recovery system.
• the space has a central exhaust system.
• there is a cooker hood in the same space.
The air supply opening must be closable if it goes through a  re-resistant wall. When there are several combustion
devices in the same space there must be enough air openings to guarantee proper combustion.
External air connection
The fresh air supply channel has a diameter of 100 millimetres. The air supply channel can be  tted via a bottom
or rear connection. If the optional base is used, the connections can be  tted through the base. For the hanging
version, the optional connection cabinet OND.2004 must be installed under the stove. If the external air supply
goes through a  rewall, that channel must be able to be shut o . If the channel is longer than 1 meter, including
a bend of 90 degrees, the channel’s diameter will need to be increased.
Sizes for both situations can be found on page 58.
Connecting the stove
The Ruby is a heavy wood stove. Depending on the version, the Ruby weighs at least 130 kilos, including the
2-meter long smoke-gas discharge. Make sure the wall or  oor that you are installing the stove on can easily carry
this weight. Before installing the stove, follow the directions in the previous chapter ‘Preparation’. Protect your back
and the  oor during installation.
Hanging version:
1. Check the packaging, and report any visible damages.
2. There are 3 di erent boxes for installation (1x the stove + 1x the side panels + 1x the glass plate)
3. Take the stove out of the box (mind your back),
4. Take the wall bracket (sizes on page 58) for the stove out and mount it to the wall,
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Ruby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Ruby in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info