813244
40
Zoom out
Zoom in
Previous page
1/112
Next page
40
3.1.3 Start damper
For lighting the stove the start damper must be open and when
cooking or heating it must be closed.
1 - Closed (cooking, heating)
2 - Open
PLEASE NOTE:
Leaving the start damper open when heating will cause the stove to overheat which
will damage the stove and its parts. In addition leaving the start damper open will
increase fuel consumption.
3.1.4 Ash pan
The ash pan is underneath the combustion chamber. It must be checked and emptied
regularly.
Emptying the ash pan must be done when the stove is cold. Please ensure that no
glowing or burning pieces of wood are remaining. Please make sure that no glowing,
unburned residues end up in the dust bin.
Always remember to put the ash pan back in its place. Forgetting to do this makes use
of the stove dangerous.
You must ensure that the ash pan is pushed in until it touches the rear wall.
3.1.5 Implement drawer
This storage drawer is at the base of the stove and is large enough to hold the various
implements needed during use of the stove. The maximum load it can hold is 10 kg.
Heavier items can cause damage to the storage drawer. The implement drawer is opened
by pressing lightly on the middle of the drawer.
Never pull on it when it is closed!
PLEASE NOTE:
It is absolutely forbidden to store easily flammable materials in this drawer, such as
alcohol, petrol, liquid fuels, paints or varnishes, lighters, paper etc.
3.2 Lighting
The performance control is set depending on the type of fuel as a function of the chimney
draught and the desired heating level. With firewood and particularly with softwood, only a
limited heating period is possible. Lignite briquettes are much better suited to burning
overnight, if they are placed on top of a layer of glowing embers.
Heating / using for the first time
Before using make sure any fixings for transport are removed from the deflection plate
over the fire chamber and remove any stickers on the glass window, making sure no
traces remain.
Open the fire door by lifting the catch. When the stove is hot use a protective glove. Set the
primary and secondary air settings as shown in Table 2 “Combustion air flow settings”.
Open the start damper. Place a starter briquette or some wood shavings on the grid. Then
add some smaller, then larger pieces of wood light it and shut the fire chamber door. Once
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wamsler W3-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler W3-50 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info