813263

Wamsler W1-40 Manual

41
Zoom out
Zoom in
Previous page
1/104
Next page
41
3.4 Closing down
Close the primary air regulator (Table 2).
Let the embers burn out and leave the stove to cool down.
Once the stove is cold, empty and clean out the fire chamber and ash pan!
3.5 Notes on heating
A properly adjusted secondary air flow ensures that any combustible elements in
the flue gases are burned off. This means they are burned in a way which
reduces the smoke and soot released into the environment. it is always possible
that the window glass will become dirty and this does not mean there is a
malfunction.
If you use your stove in the spring or autumn, you must check the draw of your
chimney first, as if the outside temperatures are high this can drop off
substantially. To do this hold a burning match in the fire door when it is partially
opened. If the flame is not clearly drawn inwards, then you first need to light a
starter fire. Do this by briefly burning some wood shavings in the stove or the
cleaning opening of the chimney itself.
The grid must be cleaned before placing any fuel on it, in order to ensure a good
supply of air to the burning material. The ash pan must be emptied regularly,
when it is cold. If the stove is still hot, use the gloves provided. Please make sure
that no glowing embers are put into your dustbin.
Take care that the ash pan is pushed in until it touches the rear wall.
PLEASE NOTE:
In the interests of clean air and safe functioning of the stove do not exceed
the maximum quantities of fuel. Otherwise there is a risk of overheating,
which can damage the stove. Damage of this kind is not covered by the
guarantee. Reduced heating should only be achieved by reducing the
quantity of fuel, never by reducing the primary airflow.
3.6 Care and cleaning
3.6.1 Cooker (Fig. 4)
After opening the fire door the grid must be cleaned using the soot scraper and
the fire iron before adding fuel.
The ash pan (1) should be emptied daily. The grid should be scraped clean of
cinders at least every third day.
By using/managing and caring for/cleaning your stove properly you enhance its
value and prolong its useful life. You save valuable resources and spare both the
environment and your wallet. The hob plates (2) and heating plates (3) should be
removed for cleaning and cleaned free from soot. By removing the hob and
heating plates the flue gas channel and the flue pipe inside the stove can also be
cleaned. By loosening of the cleaning cover (4) the lower part of the flue gas
channel around the oven can also be cleaned.
After finishing cleaning, the heating and hob plates must be replaced correctly.
The cleaning cover (4) under the oven needs to be closed tightly again.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wamsler W1-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler W1-40 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info