649002

Wagner Super Finish 31 Manual

12
Zoom out
Zoom in
Previous page
1/30
Next page
Super Finish 27 • 31
34
GB
Cleaning unit from outside
(4) and O-ring (5).
Roll in lter insert (3) (for lter insert with 70 mesh this is not
3.
necessary) and pull out of supporting part (2).
Clean all parts with appropriate cleaning agent. If pressure 4.
air is existent – blow through lter insert and supporting
part.
Remount high-pressure lter.5.
1
5
3
2
4
8.4 
Rinse Airless spray gun with an appropriate cleaning agent.
•
Clean tip thoroughly with appropriate cleaning agent so that
•
no coating material residue re-mains.
Thoroughly clean the outside of the Airless spray gun.
•


Pull protective guard (1) forward vigorously.1.
Screw grip (2) out of the gun housing. Remove intake lter 2.
(3).
Intake lter congested or defective – replace.3.
Mounting
Place intake lter (3) with the long cone into the gun
1.
housing.
Screw in grip (2) into the gun housing and tighten.2.
Slot in protective guard (1).3.
Made in Germany
max.
3900 psi
270 bar
G12
1
2
3
Danger
Danger of short circuit through penetrating

pressure or high-pressure steam cleaners.
Wipe down unit externally with a cloth which has been im-
mersed in a suitable cleaning agent.
Clean socket and the multifunction switch areas meticulously
also.
8.2 
i
Clean lters also guarantee the maximum con-
veyance quantity, constant spraying pressure
and faultless function of the unit.


Screw o the lter (g. 13) from suction pipe.1.
Clean or replace the lter. Carry out cleaning with a hard 2.
brush and an appropriate cleaning agent.


Release screws with a screwdriver (g. 14,item 1).1.
Lift (2) and remove lter disk with a screwdriver.2.
Clean or replace the lter disk. Carry out cleaning with a
3.
hard brush and an appropriate cleaning agent.
2
1

Switch o unit – set multifunction switch to
•
(OFF).
Open high-pressure lter and clean lter insert; in addition:
•
Insert open-ended spanner into the groove of the lter
1.
housing (g. 15, item 1) – screw out lter housing.
Remove lter housing (1), supporting part (2), centring ring 2.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wagner Super Finish 31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wagner Super Finish 31 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info