Manual Vortex Razor HD 5-20x50 Riflescope (page 9 of 13) (English)

540490

Zoom out

Zoom in

1/13

14 15

Bore Sighting and RZR Zero Stop Preparation

Initial bore sighting of the riflescope will save time and money

at the range. This can be done by removing the bolt and

sighting through the barrel on a bolt action rifle, or using a

mechanical or laser bore sighter.

1. Begin by turning the elevation knob clockwise until it stops.

2. Loosen, but do not remove, the three elevation turret cap

retaining screws.

3. Lift the elevation turret cap up and off the turret. This will

reveal the scale markings to be used for sight in.

4. Next, loosen, but do not remove, the three elevation zero

stop lock screws.

Preparing the RZR Zero Stop for setting:

Note: No initial adjustments are needed on the windage knob.

Note: You will not feel “clicks” as the

elevation knob is adjusted—this is

normal. The “clicks” will return after

final zero stop is set at the rifle range.

Use the graphic number scale to track

adjustments.

Bore sighting a bolt action rifle without a

mechanical or laser bore sighter:

1. Place the rifle solidly on a rest and remove the bolt.

2. Sight through the bore at a target approximately 100 yards away.

3. Move the rifle and rest until the target is visually centered inside

the barrel.

4. With the target centered in the bore, make elevation and

windage adjustments until the reticle crosshair is also centered

over the target.

If using a mechanical or laser bore sighter, set up according

to manufacturer instructions. Make windage and elevation

adjustments until the reticle crosshair is aligned with the

adjustment pattern or laser dot.

Loosen Zero Stop

Lock Screws

Sight-in

Adjustment

Scale

Do not re-tighten elevation zero stop lock screws or replace the turret

cap at this time; these will be tightened after the final sight-in.

Important

Remove

Elevation

Turret Cap

Loosen Elevation

Cap Screws

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vortex Razor HD 5-20x50 Riflescope in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vortex Razor HD 5-20x50 Riflescope Manual

Product: