540490

Vortex Razor HD 5-20x50 Riflescope Manual

7
Zoom out
Zoom in
Previous page
1/13
Next page
13
12
Use 35mm rings for the Razor 5–20x50
10 11
Riflescope Mounting
To get the best performance from your Vortex Razor
riflescope, proper mounting
is essential. Although not
difficult, the correct steps
must be followed. If you
are unsure of your abilities,
it would be best to use
the services of a qualified
gunsmith.
Centering of the Reticle
The Vortex Razor HD riflescope is pre-set from the factory
with the reticle in the center of the adjustment ranges. This is
the best position to begin sight-in.
1. Loosen the elevation turret cap retaining screws and remove
the elevation cap.
2. Loosen the eleveation zero stop lock screws.
3. Turn the windage and elevation turrets clockwise until
stopped.
4. Turn windage and elevation turrets counter-clockwise 4.25
full rotations to approximately center the reticle.
If you have changed the settings and wish to reset the
reticle to the center, this can be done easily:
Rings and Bases
Mount an appropriate base and matching rings to your
rifle according to the
manufacturer’s instructions.
The Vortex Razor 5–20x50
riflescope requires 35mm
rings.
Vortex Optics highly
recommends using the
matched Vortex Optics
Omega 35mm precision ring
sets which may be purchased
from an authorized Vortex
riflescope dealer. These rings will mount to any quality Weaver
or Picatinny type base.
If using aftermarket rings, use the lowest ring height that will
give complete clearance of scope and rifle—avoiding any
contact with barrel, receiver, bolt handle or any other part of
the rifle. A low mounting will help assure proper cheek weld,
aid in establishing a solid shooting position, and promote fast
target acquisition.
At this point, the riflescope is ready for bore sighting (see
Bore Sighting section).
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vortex Razor HD 5-20x50 Riflescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vortex Razor HD 5-20x50 Riflescope in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info