764122

Vonroc VC502AC Manual

8
Zoom out
Zoom in
Previous page
1/48
Next page
8
EN
WWW.VONROC.COM
4. OPERATION
If the vacuum cleaner accidentally tips over,
the shut-off float (20) mechanism may
cover the motor vacuum port and stop the
suction. If this happens, simply stand the
vacuum upright and turn it off until the float
(20) returns to its normal position.
Switching on (Fig. A):
Do not vacuum without a filter!
1. Fully unwind the suction hose (11).
2. Connect the mains plug.
3. Press the power switch (1) into the “ ON/1”
position to start your vacuum cleaner.
Switching off (Fig. A):
Press the power switch (1) into the “ OFF/0” posi-
tion to switch off your vacuum cleaner.
Dry vacuuming (Fig. A, C - F)
Shake and prod the cloth filter (17)
regularly to maintain the suction power.
To avoid the cloth filter (17) becoming
clogged, we recommend the additional use
of a dust collection bag (16).
Fine dust, such as dust from cement, soot
and plaster are too fine to be used with only
the cloth filter (17) and risk getting into the
motor and damaging it. Therefore we
strongly recommend a dust collection bag
(16) when cleaning these types of
materials.
Clogged dust collection bag (16) can burst
- therefore make sure to replace the dust
collection bag in a timely manner!
1. Switch off (1) the machine and remove the
mains plug from the mains.
2. Unlock the locking clamp (6) and remove the
top section (10).
3. Before vacuuming, remove all dirt and debris
from the container (9).
4. Carefully slide cloth filter (17) down over the
filter cage (21) making sure the whole cage
(21) is covered as shown in Fig. C-1.
5. For vacuuming with dust collection bag (16):
• Hold the cardboard collar tightly and slide
the rubber protective element as far as
possible onto the intake port (19) as shown
in Fig. D.
• When everything is in place, unfold the bag
(16) out and position it around the inside
walls of the container (9).
6. Reattach the top section (10) again and lock
the locking clamp (6).
7. Insert one end of the hose (11) into the vacu-
uming port (3). Fully unwind the suction hose
(11).
8. Connect the mains plug.
9. Press the power switch (1) into the “ ON/1”
position to start your vacuum cleaner.
10. The machine now is ready to use for dry vacuum
cleaning.
11. Press the power switch (1) into the “ OFF/0”
position to switch off your vacuum cleaner.
Wet vacuuming (Fig. A, C, E - G)
The vacuum cleaner is equipped with a float
(20). The suction power decreases when
the maximum filling level is reached. Switch
the vacuum cleaner off (1) immediately.
Remove the plug from the socket and
empty the container (9).
Clean the float (20) at regular intervals, and
check it for damage. Otherwise, its function
can be impaired.
Never reach into the water to be suctioned
up. Danger of electric shock.
Immediately switch (1) the machine off if
foam forms or liquids escape!
Do not use a dust collection bag (16)!
1. Switch off (1) the machine and remove the
mains plug from the mains.
2. Unlock the locking clamp (6) and remove the
top section (10).
3. Before wet vacuuming, remove the dust collec-
tion bag (16), the cloth filter (17) and remove all
dirt and debris from the container (9).
4. Carefully slide foam filter (18) down over the
filter cage (21) making sure the whole cage
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc VC502AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC502AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info