764122
7
Zoom out
Zoom in
Previous page
1/48
Next page
EN
7
WWW.VONROC.COM
to blow dust and debris out of garages or of patios
and driveways.
The device is not suitable for commercial or indus-
trial use.
TECHNICAL SPECIFICATIONS
Model No. VC502AC
Mains voltage 220-240 V~
Mains frequency 50-60 Hz
Power input 1000W
Cable length 5m
Protection category IPX4
Suction force 16 kPA, 1.5 m3/min
Container capacity approx. 12 L
Useful volume approx. 5 L
Filter - dry Cloth filter
Filter - wet Foam filter
Hose system Ø32mm
Diameter intake port (19 Fig. D) Ø44mm
Recommended dust bag VC802AA
Weight (incl. all accessories)
approx. 3.6kg
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-4.
1. On/Off switch
2. Carrying handle
3. Vacuum port
4. Blowing port
5. Castor wheels
6. Locking clamp
7. Power cord storage
8. Tubes and nozzles storage
9. Container
10. Top section
11. Hose
12. Handle
13. Suction tubes
14. Floor nozzle
15. 2 in 1 nozzle
16. Dust collection bag
17. Cloth filter
18. Foam filter
19. Intake port
20. Float
21. Filter cage
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
1. Press the 4 steering castors (5) on the con-
tainer (9) and tighten the screws as shown in
Fig. B. Make sure the steering castors (5) are
securely fastened.
2. Assemble the vacuum port (3) on the container
(9) and tighten the screws as shown in Fig. B.
3. Fit the filter. Ensure to mount the correct filter,
depending on the application:
For dry vacuum cleaning, carefully slide
the cloth filter (17) over the filter cage (21)
making sure the entire cage (21) is covered
as shown in Fig. C-1.
For wet vacuum cleaning, carefully slide
the foam filter (18) over the filter cage (21)
making sure the entire cage (21) is covered
as shown in Fig. C-2.
4. Place the top section (10) on the container (9)
as shown in Fig. E.
5. Connect the suction hose (11).
For vacuuming (Fig. F-1), connect the suc-
tion hose (11) to the vacuum port (3).
For blowing (Fig. F-2), connect the suction
hose (11) to the blowing port (4).
6. One or more suction tubes (13) can be fit to the
handle (12) to extend it (fig. A).
7. Connect the desired nozzle to the handle or
suction tubes (13).
Floor nozzle (14)
The floor nozzle is designed for domestic wet and
dry vacuuming in, for example, the house, work
room, or garage.
2 in 1 nozzle (15)
The crevice nozzle is designed for domestic wet
and dry vacuuming, edges and other areas that
are difficult to access. The brush is designed to
vacuuming solids from small areas.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc VC502AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC502AC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info