778574

Vonroc TL502XX Manual

9
Zoom out
Zoom in
Previous page
1/60
Next page
EN
9
WWW.VONROC.COM
locking mechanisms when opening. Each section
has its own locking mechanisms.
• Place the Telescopic Ladder on a firm, level
surface. Ensure the ladder is in closed position
as shown on figure D1.
• Unlock the Storage strap (4).
• Place one foot on the Bottom Rung (5) to stabi-
lise the ladder. Ensure that the front side of the
ladder is facing you.
• Starting with the second rung from the bottom
(as shown in figure D2), use both hands to
grasp the Hand Grips (7) on either side of the
rung and pull upwards to extend the step.
• When each step is fully extended, you should
hear a “click”, confirming that the Locking
Mechanisms (6) are engaged for that level.
• Check that all opened rung sections are locked,
the red Locking Mechanisms (6) should be
clearly visible, as shown on figure C2. Meanwhi-
le, the red parts of the Retract Levers (8) should
not be visible. Also ensure that all the distances
between opened rungs are of equal height.
• When all sections are locked, you can use
the ladder. Position the ladder with a correct
angle for a leaning ladder (angle of inclination
approximately 1:4) with the rungs or treads
level (e.g. 1m away from the base of a wall if
extending to climb 4m up).
Opening the ladder to full length (Fig. A, C, D)
If you are opening the Ladder to its full
length, you should always extend from top
to bottom.
• Place the Telescopic Ladder on a firm, level
surface. Ensure the ladder is in closed position
as shown on figure D1.
• Unlock the Storage strap (4).
• Place one foot on the Bottom Rung (5) to stabi-
lise the ladder. Ensure that the front side of the
ladder is facing you.
• Starting with the Top Bar ((1) as shown in figure
D3), use both hands to grasp the Hand Grips (7)
on either side of the rung and pull upwards to
extend the step.
• When each step is fully extended, you should
hear a “click”, confirming that the Locking
Mechanisms (6) are engaged for that level.
• Check that all opened rung sections are locked,
the red Locking Mechanisms (6) should be
clearly visible, as shown on figure C2. Meanwhi-
le, the red parts of the Retract Levers (8) should
not be visible. Also ensure that all the distances
between opened rungs are of equal height.
• When all sections are locked, you can use
the ladder. Position the ladder with a correct
angle for a leaning ladder (angle of inclination
approximately 1:4) with the rungs or treads
level (e.g. 1m away from the base of a wall if
extending to climb 4m up).
Closing the ladder (Fig. A, E)
The entire ladder is closed by using the
Retract Levers (8). For safety reasons, the
treads may not be closed separately.
Do not engage the locking mechanisms (6)
manually. Only use the Retract levers (8) to
close the ladder.
• Hold the Telescopic Ladder in an upright position.
• Place one foot on the Bottom Rung (5) to stabi-
lise the Ladder.
• Starting at the rung where the Retract Levers
(8) are placed, use both hands to grasp the
Hand Grips (7) on either side of the rung. Ensu-
re your hands are placed in such way as shown
on figure E, securing you do not catch your
fingers when closing the ladder.
• Then disengage the Retract Levers (8) with your
thumbs by pushing them towards the centre, so
the red parts become visible.
• The ladder will now start closing. For safety
reasons, the ladder has been fitted with a
soft-closing system, preventing the ladder from
closing rapidly.
Transporting the ladder (Fig. A)
Only transport the ladder when the Storage
Strap is locked.
When carrying the ladder, completely close the lad-
der to its most compact form. Ensure the Storage
Strap (4) is locked, securing the ladder.
5. MAINTENANCE
The ladder is designed to function
faultlessly for a long period and with a
minimum of maintenance. Extend its
lifespan by regularly cleaning the machine
and treating it correctly.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc TL502XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc TL502XX in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 16.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info