Manual Vonroc TL502XX (page 7 of 60) (English, German, Dutch, French, Italian, Polish, Turkish, Spanish)

778574

Zoom out

Zoom in

1/60

WWW.VONROC.COM

car, ensure they are suitably placed and secu-

red to prevent damage.

• The ladder shall be inspected after delivery

and before every use to conﬁrm condition and

operation of all parts.

• Visually check that the ladder is not damaged

and is safe to use at the start of each working

day when the ladder is to be used.

• Remove any contamination from the ladder,

such as wet paint, mud, oil or snow.

• For frequent users, regular periodic inspection

is required.

• Before using a ladder at work, a risk assess-

ment should be carried out respecting the legis-

lation in the country of use.

• Ensure the ladder is suitable for the task. If

unsure, contact a qualiﬁed person for guidance.

• Do not use a damaged or otherwise unsuitable

ladder.

POSITIONING AND ERECTING THE LADDER

• Ensure the ladder is fully collapsed, all locks are

secured and the ladder is free from contami-

nants before moving to the area of work. Only

erect and close in a safe work area. Do not move

the ladder when erect.

• Only position and use the ladder on an even, level

and unmoveable base.

• When positioning the ladder, take into account

risk of collision with the ladder e.g. from pedes-

trians, vehicles or doors.

• Secure doors (not ﬁre exits) and windows where

possible in the area.

• Identify any electrical risks in the work area, such

as overhead lines or other exposed electrical

equipment. This ladder does not offer insulation

or protection from electrical hazards.

• Take extra care when using electrical equipment,

this ladders conducts electric current. Always

take precautions so that a power cable cannot

become trapped or become caught when using

the ladder. Check beforehand that your tool’s

electrical cable is undamaged. Keep the ladder

at least 2m away from non-insulated live electri-

cal equipment.

• The ladder shall be only be positioned ﬂat on its

feet, not the rungs or steps. Never position or

use the ladder on slippery surfaces (such as ice,

shiny surfaces or signiﬁcantly contaminated solid

surfaces) unless additional effective measures

are taken to prevent the ladder slipping or ensu-

ring contaminated surfaces are sufﬁciently clean.

• The ladder shall be erected at the correct positi-

on, such as the correct angle for a leaning ladder

(angle of inclination approximately 1:4) with the

rungs or treads level (e.g. 1m away from the base

of a wall if extending to climb 4m up).

• Always position the ladder against a ﬂat, non-fra-

gile surface and secure properly before use e.g.

tied down or with the use of a suitable stability

device.

• The locking mechanisms for all the extended rung

sections shall be locked before using the ladder.

• Never attempt to move or reposition the ladder

from above.

USING THE LADDER

• Do not exceed the maximum total load of

150kg/330lbs for this ladder.

• Only allow one person to use the ladder at any

time.

• Ladders should only be used for light work of

short duration.

• Use non-conductive ladders for unavoidable live

electrical work. This ladder is not suitable for live

electrical work as it is conductive and offers no

protection from electrical hazards.

• Never erect or use the ladder upside down. The

base should always sit ﬁrmly on the ground.

• Do not use the ladder outside in adverse weather

conditions, such as strong wind or rain.

• Do not leave an extended ladder unattended.

• Take precautions against children playing on the

ladder.

• Do not place any tools or other objects on the

rungs and do not hang anything on the ladder

system.

• Equipment carried while using a ladder should be

light and easy to handle.

• Face the ladder and keep a secure grip when

ascending and descending.

• Do not slide down the stiles of the ladder. Climb

and descend with deliberate movements.

• Always maintain 3 points of contact with the

ladder at all times e.g. two feet on the same rung

and a hand on the stiles. Use additional safety

equipment if this is not possible.

• Maintain a handhold whilst working from a ladder

or take additional safety precautions if you can-

not.

• Do not overreach; always keep your belt buckle

(navel) inside the stiles and both feet on the same

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc TL502XX in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 16.04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc TL502XX Manual

Product: