Manual Vonroc TL502XX (page 8 of 60) (English, German, Dutch, French, Italian, Polish, Turkish, Spanish)

778574

Zoom out

Zoom in

1/60

WWW.VONROC.COM

step/rung throughout the task.

• Avoid work that imposes a sideways load on

ladders, such as side-on drilling through solid

materials (e.g. brick or concrete).

• In the leaning ladder position it is not allowed to

climb higher than last metre of the ladder.

• The user shall put the hands around the stile

when bringing the ladder from extended to

storage position.

• Do not stand on the top four rungs on the lad-

der; this can cause stability issues.

• Do not use the ladder as a bridge.

• Leaning ladders used for access to a higher

level should be extended at least 1m above the

landing point.

• Do not step off a leaning ladder at a higher level

without additional security, such as tying off or

use of a suitable stability device.

• Do not step off the side of the ladder.

• Do not spend long periods of time on a ladder

without regular breaks (tiredness is a risk).

• Take care when closing the ladder to not catch

any ﬁngers, clothing or hair in the mechanisms.

Close one rung at a time.

2. PRODUCT INFORMATION

Intended use

The Telescopic Ladder is designed and intended

for domestic use, as a climbing aid in home and

garden environments and for hobby purposes. This

ladder is not a toy. Children should be supervised at

all times to ensure they do not play with the ladder

system. This ladder is not developed for professi-

onal use. The Telescopic Ladder must be handled,

cared for and maintained in accordance with these

instructions. Any other use is deemed improper and

may result in damage to property, personal injury

or even death. The ladder complies to the norms of

EN131, 96-333 and Warenwet.

TECHNICAL SPECIFICATIONS

Model No. TL502XX

Length, extended 3.8 m

Length, retracted 91 cm

Maximum permissible load 150 kg

Number of treads 13 treads

Inclination angles 65°–75°

Maximum number of users 1 user

Weight 13.1 kg

DESCRIPTION

The numbers in the following text refer to the pictu-

res on page 2-4.

1. Top Bar

2. Telescopic Tubes

3. Handle

4. Storage Strap

5. Bottom Rung

6. Locking Mechanisms

7. Hand Grips

8. Retract levers

9. Stabiliser Bar

3. ASSEMBLY

The Stabiliser Bar must be ﬁtted before use.

NEVER use the ladder without the Stabiliser

Bar.

Take care during assembly that the ladder

does not fall over. If necessary, get

assistance from a second person.

Mounting the stabiliser bar (Fig. A, B)

• Flip the Telescopic Ladder vertically so that the

feet are accessible. You will notice plastic pins in

the slot on each foot. In order to ﬁt the Stabiliser

Bar (9), these pins will need to be snapped. This

can be done easily using a ﬂathead screwdriver.

• Once the pins have been snapped and removed,

the Stabiliser Bar (9) will ﬁt into the slots. You will

need to line up the holes on the Stabiliser Bar with

the holes on the legs of the Telescopic Ladder.

NOTE: You may need a rubber hammer to care-

fully tap the Stabiliser Bar into the slots securely.

• With the Stabiliser Bar (9) slotted onto the feet

of the Ladder, secure into place using the 2 bolts

and nuts provided, as shown on ﬁgure B. Tighten

with a wrench to secure.

4. OPERATION

Before using the ladder, always observe the

safety instructions and obey the relevant

regulations.

Opening the ladder to intermediate length

(Fig. A, C, D)

The telescopic ladder will automatically engage the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc TL502XX in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 16.04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc TL502XX Manual

Product: