Manual Vonroc MS806AA (page 9 of 56) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

778563

Zoom out

Zoom in

1/56

WWW.VONROC.COM

is indicated on the extension arm (4). Do not

extend further than the maximum length.

3. Turn the extension arm knob (6) clockwise to

tighten it and secure the extension arm into

place.

Adjusting The Roller Height (Fig. E, I)

1. Turn the workpiece support knob (3) on the col-

lar of the extension arm (4) counter-clockwise

to loosen it.

2. Raise or lower the roller (1) to the desired

height.

3. Turn the workpiece support knob (3) clockwise

to tighten it and secure the roller (1) into place.

Levelling the mitre saw stand (Fig. I)

The mitre saw stand is equipped with an adjustable

foot (24) to level the mitre stand if necessary. Turn

the adjustable foot (24) upwards or downwards to

level the stand. If necessary, use a spirit level to

check if the stand is level.

Using The end stop (Fig. I, J)

The mitre saw stand features end stops (5) which al-

low repetitive cuts to be made quickly and accurately.

1. Adjust the height of the workpiece support (2)

so that the lip of the end stop (5) is in line with

the work surface of the mitre saw.

2. Adjust the extension arms (4) to the desired

cutting length.

3. Place the end of the workpiece against the end

stop (5) and commence the cut.

Using the material supports (Fig. I)

The mitre saw stand is equipped with material

supports (25) to store material as wooden beams

and sheet material. This way, the material can be

quickly accessed whilst working behind the mitre

saw stand. The material supports (25) can be

simply folded outwards to use, and folded inwards

if not in use.

Transportation (Fig. K)

Risk of unsafe operation. Ensure proper

footing and use caution when rolling the

mitre saw stand to prevent tipping or loss

of balance.

1. Make sure the extension arms have been put

into to the most compact position (refer to

‘Adjusting The Extension Arms’).

2. Now fold the stand as described in ‘Folding the

stand’.

3. Lift up and hold the handle (8) as shown on

ﬁgure K.

Adjusting the Mitre saw mounting bar (Fig. L)

The mitre saw mounting bars (7) must be secure on

the miter saw stand. If adjustment is needed, use the

adjustable nut (26) to change the clamping tension.

• To increase the clamping tension, turn the

adjustable nut (26) clockwise.

• To decrease the clamping tension, turn the

adjustable nut (26) anti-clockwise.

5. MAINTENANCE

The mitre saw stand is designed to function

faultlessly for a long period and with a

minimum of maintenance. Extend its

lifespan by regularly cleaning the machine

and treating it correctly.

Cleaning

Regularly clean the mitre saw stand, preferably

after each use. Clean with a suitable proprietary

house- hold cleaner and a soft dry cloth. Do not

submerge your mitre saw stand in water or any

liquid for any reason. Do not use solvents (petrol,

alcohol, ammonia, etc.) as they will damage the

plastic parts.

Maintenance

Never use a damaged or broken clamping mitre

saw stand. Temporary repairs are not permitted.

Check the plastic feet of the mitre saw stand

before and after use of the mitre saw stand. Do not

use the mitre saw stand without the plastic feet or

when the plastic feet are worn. Always maintain

a visual control of the mitre saw stand before and

after use of the mitre saw stand.

Repairs and maintenance shall be carried out by a

competent person with suitable replacement parts.

Unapproved third party spares are not recommend-

ed and will void your warranty.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc MS806AA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 8.74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc MS806AA Manual

Product: