||
03 Audio and media
03
78
* Option/accessory, for more information, see Introduction.
Watch TV
– In the normal view for the media source,
press MEDIA, turn TUNE to
TV and then
press OK/MENU.
> A search starts and after a short while
the most recently used channel is
shown.
Changing channel
It is possible to change channel as follows:
•
Turn TUNE, a list of all available channels
in the area is shown. If any of these chan-
nels is already saved as a preset (p. 78)
then its preset number is shown to the
right of the channel name. Continue turn-
ing TUNE to reach the desired channel
and press OK/MENU.
•
By pressing the preset buttons (0-9).
•
Via a short press on the
/ but-
tons the next available channel in the area
is shown.
NOTE
If the car has been moved within the coun-
try, for example, from one city to another,
it is not certain that the presets are availa-
ble at the new location as the frequency
range may have changed. Then do another
search and save a new preset list; see
Save available TV channels as presets
(p. 79).
NOTE
If no reception is available on the preset
buttons, it may be because the car is at a
location other than where the scan of TV
channels was run, for example, if the car
was driven from Germany to France. A
new selection of country and a new search
may then need to be carried out.
Related information
•
Teletext* (p. 79)
•
Picture settings (p. 48)
•
Reception of TV* channel is lost (p. 80)
•
Menu overview - TV* (p. 90)
Searching TV* channels/Preset list
After a search of TV channels the available
channels are saved in a preset list. The order
and search criteria in the preset list can be
changed.
Change in the preset list
You can change the order of the channels
that are shown in the preset list. A TV channel
can have more than one place in the preset
list. The TV channel positions can also vary in
the preset list.
1. To change the order in the preset list, in
the normal view for the TV source, press
OK/MENU and select
Presets.
2. Turn TUNE to the channel you want to
move in the list and confirm with OK/
MENU.
> The selected channel is highlighted.
3. Turn TUNE to the new location in the list
and confirm with OK/MENU.
> The channels change places with each
other.
After the preset channels (max. 30) come all
the other channels available in the area. It is
possible to move a channel up to a place in
the preset list.
Related information
•
Audio and media - operating the system
(p. 28)