536159

Voltcraft VC-890 Manual

46
Zoom out
Zoom in
Previous page
1/84
Next page
48
Do not operate the multimeter when it is open, when the battery compartment is open, or the battery
compartment lid is missing. The safety mechanism prevents the opening of the battery and fuse lid
when test leads are plugged into the measurement sockets. It also prevents test leads from being
plugged in when the battery and fuse lid is open.
Measurements in damp rooms or under unfavourable environmental conditions are not permitted.
Unfavourable environmental conditions are: dampness or high humidity, dust and fl ammable gases,
vapours or solvents, as well as thunderstorms or similar conditions such as strong electrostatic fi elds,
etc.
Use only test leads or measurement accessories which meet the specifi cations of the multimeter.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In addition,
improper use can cause hazards such as short circuiting, fi re, electric shock etc. Read the instructions
carefully and keep them. Make this product available to third parties only together with its operating
instructions.
Observe all safety notes and information given in these instructions.
3. OPERATING ELEMENTS
See the fold-out page.
1 Rubber protective frame
2 Display
3 SHIFT/SETUP button
Switch the measuring function (red symbol on the rotary switch) /
switch function of the buttons (blue button labels)
4 Rotary switch for measurement function selection
5 mAA measurement socket
6 10 A measurement socket
7 °CHzV measurement socket (for “plus” of the same size)
8 COM measurement socket (reference potential, “minus”)
9
-button
Low Imp. 400 k button for impedance switching
125
Capacité
Plage Précision Résolution
60 nF ±(2,5 % + 20 digit) 0,001 nF
600 nF
±(2,0 % + 20 digit)
0,01 nF
6 F 0,0001 F
60 F 0,001 F
600 F 0,01 F
6000 F ±(5 % + 20 digit) 0,1 F
60 mF non spécifi é 0,001 mF
Protection contre la surcharge : 1000 V
Fréquence
Plage Précision Résolution
60 Hz
±(0,02 % + 8 digit)
0,001 Hz
600 Hz 0,01 Hz
6 kHz 0,0001 kHz
60 kHz 0,001 kHz
600 kHz 0,01 kHz
6 MHz 0,0001 MHz
60 MHz 0,001 MHz
Protection contre la surcharge : 1000 V ;
Pour 10 Hz – 60 MHz, amplitude d’entrée présente a : 1 Vrms a 30 Vrms
Rapport cyclique (rapport impulsion-pauses)
Plage Précision Résolution
10 Hz – 2 kHz
(10 % – 90 %)
±(1,2 % + 30 digit)
0,01 %
Protection contre la surcharge : 1000 V
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft VC-890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC-890 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info