Manual Voltcraft VC-450 E (page 55 of 136) (English, German, Dutch, French)

738231

Zoom out

Zoom in

1/136

10. Additional functions

The function buttons (G) can be used to activate various additional functions.

Withthepushofthebutton,anacousticsignalisoutputforconrmation.

a) SELECT Function

Severalmeasuringfunctionsareassignedsubfunctions.Thesubfunctionsaremarkedred.Push“SELECT”toselect

them. Every push will switch to the next subfunction.

b) RANGE - Manual measurement range selection

TheRANGEfunctionpermitsmanualsettingofaspecicmeasurementrange.Itispossiblethattheautomaticmeas-

urement range setting will already select the next-higher measurement range or switch between ranges if the range is

problematic. To suppress this, the measurement range can be set manually in some measuring functions.

The manual measuring range setting works in all measuring functions, except: Motor, mV, continuity test and diode

test.

Pushingthe“RANGE”buttonwillcausethe“AUTO”symboltogooutandthedevicetoswitchtomanualmode.

Eachpushofthe“RANGE”buttonswitchesthemeasurementrange;attheend,itwillstartwiththelowestmeasure-

ment range again. The respective measurement range is indicated by the position of the decimal point.

Toswitchoffthisfunction,keepthe“RANGE”buttonpressedforapprox.2seconds.The“AUTO”symbolappears

and the automatic measurement range selection is active again. Switching the measuring function deactivates this

function as well.

c) MAX MIN Function

This function permits saving and display of maximum or minimum values during a measuring series. Press the “MAX

MIN”buttontoactivatethismeasuringfunction.Auto-rangeisdeactivated.

With the active function, the minimum and maximum value of the current measuring series is saved at the same time.

The max. and min. display can be switched at every push of a button (MAX MIN). The values are deleted after a

measuring function change or when switching off the device.

Todeactivatethefunction,keepthe“MAXMIN”buttonpushedforapprox.2seconds.Thedisplay“MAX”or“MIN”

disappearsand“AUTO”appearsagain.

This additional function cannot be activated in the measuring function “Motor” and “Hz”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC-450 E in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC-450 E Manual

Product: