Manual Voltcraft VC-450 E (page 53 of 136) (English, German, Dutch, French)

738231

Zoom out

Zoom in

1/136

l) Temperature measuring

During temperature measurement, only the temperature sensor must be subject to the temperature

to be measured. The meter working temperature must not be undercut or exceeded. Otherwise,

there may be measuring errors.

The contact temperature sensor must only be used at voltage-free surfaces.

The meter contains a wire sensor that can measure up to

temperatures of -40 to +230 °C. To use the full measurement

range (-40 to +1000 °C) of the multimeter, optional type K

thermal sensors are available. The enclosed adapter plug is

required to connect type-K sensors with miniature plugs.

Any type K thermal sensor may be used for temperature

measurement. The temperature values can be displayed in

°C or °F.

For measuring temperatures, proceed as follows:

- TurntheDMMonandselectmeasuringfunction“°C°F”.

The display shows the unit °C for temperature measure-

ment.

- Connect the enclosed type-K-measuring adapter (O) to the

V- and COM-measuring jacks in the correct polarity. The

adapteronlytsontothemeterintheproperdirectionand

will cover the current measuring jacks for safety.

- Plug the enclosed temperature sensor into the measur-

ing adapter in the correct polarity. The two contacts of the

thermocouple are differently wide, to prevent wrong con-

nection.

- The display shows the temperature value in °C.

- The“SELECT”buttoncanbeusedtoswitchtheunitfrom

°C to °F. Every time you push the button, you switch the

unit.

- If “OL” appears on the display, the measurement range

has been exceeded or the sensor is interrupted.

- After measuring, remove the sensor and turn off the DMM.

m) 3-Phase rotating direction display “Motor”

TheDMMmayidentifytherotatingdirectionina3-phasecurrentnetworkviathemeasuringfunction“Motor”.Only2

measuringlinesareneededtodisplaytherotatingdirection.Duringidentication,theouterconductorsL1,L2andL3

mustbescannedinsequence.TheDMMrecognisesthephaseoffsetandshowstherotatingdirection(rotatingeld)

with an arrow subsequently.

The 3-phase rotating direction display can be chosen only in the AC-V-range.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft VC-450 E in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft VC-450 E Manual

Product: