536151
27
Zoom out
Zoom in
Previous page
1/62
Next page
27
It must be assumed that the safe operation is no longer possible, if:
- the appliance is visibly damaged
- it does not function any longer and
- the appliance has been stored for long periods of time under unfavourable conditions
or
- the appliance has been subject to considerable stress in transit.
Do not switch the measuring instrument on immediately after it has been taken from
a cold to a warm environment. The condensation water generated could destroy the
device. Allow the device to reach room temperature before switching it on.
Do not leave the packaging material lying around carelessly. Plastic film and/or bags,
polystyrene parts, etc. can be dangerous in the hands of children.
You should also heed the safety instructions in each chapter of these instructions.
Product Description
The Digital Multimeter (hereinafter referred to as DMM) has a high-contrast, 3
3
/
4
-digit
liquid crystal display (LCD) with function and measurement unit display.
The individual measuring ranges are selected via the rotary switch in which "auto
range", the automatic range selection, is active. The appropriate range of measure-
ment is set for each application individually.
Further additional functions include:
"HZ/%" - for indicating the pulse/pause ratio of a signal in %,
"RANGE" - manual measurement range setting,
"HOLD" for "freezing" a measuring value,
"REL" to perform a reference measurement,
An automatic power-off function (auto power off) switches the DMM off, if it has
not been used for approximately 35 minutes. This makes the batteries last longer.
The measuring instrument can be used universally both at the hobby level and at the
installation or school level.
A compound 9V alkaline battery, e.g. a 6LR61 or MN1604 or 6F22 or 006P type, are
required / used for supplying the power.
A fold-out stand is installed on the rear side of the protection rubber frame. You can
use this to move the measuring instrument into a diagonal position, which makes it
easier to read the display.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft AT-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft AT-200 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info