540706
4
Zoom out
Zoom in
Previous page
1/10
Next page
BEFORE YOU CALL FOR SERVICE
1. Check to ensure that the oven is plugged in securely. If it is not, remove the plug from
the outlet, wait 10 seconds, and plug it in again securely.
2. Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be
operating properly, test the outlet with another appliance.
3. Check to ensure that the control panel is programmed correctly and the timer is set.
4. Check to ensure that the door is securely closed engaging the door safety lock system.
Otherwise, the microwave energy will not flow into the oven.
IF NONE OF THE ABOVE RECTIFY THE SITUATION, THEN CONTACT A QUALIFIED TECH
NICIAN. DO NOT TRY TO ADJUST OR REPAIR THE OVEN YOURSELF.
INSTALLATION
1. Make sure that all the packing materials are removed from the inside of the door.
2. Check the oven for any damage, such as misaligned or bent door, damaged door seals
and sealing surface, broken or loose door hinges and latches and dents inside the cavity
or on the door. If there is any damage, do not operate the oven and contact qualified serv
ice personnel.
3. This microwave oven must be placed on a flat, stable surface to hold its weight and the
heaviest food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture, or high humidity are generated, or near
combustible materials.
5. For correct operation, the oven must have sufficient airflow. Allow 20cm of space
above the oven, 10cm at back and 5cm at both sides. Do not cover or block any openings
on the appliance. Do not remove feet.
6. Do not operate the oven without glass tray, roller support, and shaft in their proper
positions.
7. Make sure that the power supply cord is undamaged and does not run under the oven
or over any hot or sharp surface.
8. The socket must be readily accessible so that it can be easily unplugged in an emer
gency.
9. Do not use the oven outdoors.
17
ENGLISH
4
MENU ACTION SCREEN
4. Вращайте регулятор MENU SELECT/TIME ADJUST для установки веса продукта: 100 г.
5. Нажмите кнопку START.
Автоматическое размораживание
Вам нужно только выбрать вес продуктов, которые Вы хотите разморозить (мясо, птицу,
морепродукты), а печь сама выберет надлежащую программу и автоматически разморозит
продукты. Дисплей покажет максимальный вес для каждой категории размораживаемых
продуктов.
Пример: допустим, Вы хотите разморозить 600 г. креветок. Для этого:
1. Нажмите кнопку MENU.
2. Вращайте регулятор MENU SELECT/TIME ADJUST до тех пор, пока на дисплее не замигает
пункт меню FISH.
3. Нажмите кнопку WEIGHT ADJ.
4. Вращайте регулятор MENU SELECT/TIME ADJUST для установки веса продукта: 600 г.
5. Нажмите кнопку START.
Установка программы приготовления пищи
Вы можете задать последовательность процесса приготовления пищи на Ваше усмотрение.
Допустим, Вы хотите:
1. Разморозить продукт.
2. Установить определенный уровень мощности.
3. Приготовить пищу, используя режим гриль.
Для этого:
I. 1. Нажмите кнопку MENU.
2. Вращайте регулятор MENU SELECT/TIME ADJUST до тех пор, пока на дисплее не
замигает нужный пункт меню.
3. Нажмите кнопку WEIGHT ADJ.
4. Вращайте регулятор MENU SELECT/TIME ADJUST для установки веса
размораживаемого продукта.
II. 1. Нажмите кнопку MICRO POWER для выбора желаемого уровня мощности.
III. 1. Нажмите кнопку GRILL/COMB.
2. Установите необходимые параметры приготовления пищи в режиме гриль.
IV. Нажмите кнопку START.
Примечание: Во время процесса приготовления пищи по заданной программе, на дисплее
появляются индикаторы 1S, 2S или 3S в зависимости от стадии, на которой находится
процесс приготовления. По завершении программы приготовления пищи прозвучит
тройной звуковой сигнал.
Установка времени, по достижении которого начнется приготовление пищи по
заданной программе
Допустим, Вы хотите начать процесс приготовления пищи в 11:30 c 50% уровнем мощности:
1. Поместите продукты, которые необходимо приготовить в печь.
2. Нажмите кнопку CLOCK/PRESET.
3. Вращайте регулятор MENU SELECT/TIME ADJUST до тех пор, пока на дисплее не появится
цифра 11.
4. Нажмите кнопку CLOCK/PRESET.
5. Вращайте регулятор MENU SELECT/TIME ADJUST до тех пор, пока на дисплее не появится
цифра 30.
РУССКИЙ
1661.qxd 17.12.03 10:17 Page 8
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vitek VT 1661 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vitek VT 1661 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info