769323

Visonic Powermaster-360 Manual

47
Zoom out
Zoom in
Previous page
1/96
Next page
D-307500 PowerMaster 360 Installer's Guide 47
ON by strobe: The PGM output is activated by a strobe.
PGM:PULSE TIME
Determine the PGM output pulse time. This value is the same for all events (by ARM AWAY,
by ARM HOME, by DISARM etc.) which were selected with "activate PULSE" option.
Options: pulse time 2s (default); pulse time 30s; pulse time 2m; pulse time 4m.
4.7.3 Entering Daytime Limits
05:OUTPUS  LOCKOUT TIME …
Enter the “LOCKOUT TIME” menu and enter the daytime limits through which the PGM device will turn off, even
when the associated sensors are triggered.
Step 1
Step 2
Step 3
Step 4
Select "05:OUTPUTS"
menu
Select “LOCKOUT
TIME” menu
Press
Enter the time at which
you wish the lockout state
to begin
05:OUTPUTS
LOCKOUT TIME
start- HH:MM
TIME 11:30
Step 5
Step 6
Step 7
Step 8
Press
Press
Enter the time at which
you wish the lockout
state to end
Press to return
to “LOCKOUT TIME” or
to take you to
“<OK> TO EXIT”
start- HH:MM
stop- HH:MM
TIME 19:00
stop- HH:
4.8 Custom names
4.8.1 Custom zone names
During the device enrollment process you also define the Location name where the device is installed. The location
name is selected from a Location List of Custom names - see Section 4.4.2, Part B, for Location List and instructions.
Define the custom location names according to your specific needs and use them during device enrollment.
To define the Custom Location names, follow the instructions below. Additional guidance is provided in section 4.2.
06:CUSTOM NAMES  CUST.ZONES NAME
Enter CUST.ZONES NAME (see guidance above), then refer to the table below which provides you with detailed
explanations and programming instructions to edit the desired custom location.
Note: All 31 location names can be edited.
Configuration Instructions
Enter the Custom Location names you require to edit.
To edit:
Press to enter the CUST. ZONES NAME sub menu and then press again to select the Location # you
require to edit, for example TEXT LOC. #01 – the display alternates with the current Custom name, for example,
Master Bdrm. To change the name, at the blinking cursor, enter the Location name you require and at the end, press
to confirm. When done, press to return.
Note: To enter the Location name use the String Editor below.
IMPORTANT! The editing of a custom zone name automatically deletes the original text.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic Powermaster-360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Powermaster-360 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info