769323
45
Zoom out
Zoom in
Previous page
1/96
Next page
D-307500 PowerMaster 360 Installer's Guide 45
4.6.8 Wi-Fi
You can configure the panel remotely from the installer configurator application using a wireless device such as a
mobile phone or tablet.
To connect a wireless network device to the panel, complete the following steps:
1. From the 8 WiFi > ACCESS-Point > A. POINT Mode menu, select Enable. The installer must configure this
option to activate Wi-Fi access.
2. From the ACCESS-Point menu, select START A.Point to activate the access-point.
The Wi-Fi status indicator light on the panel blinks fast during the activation process and blinks slowly when
the access-point is active.
Access-point can also be activated by pressing both (+) and (-) buttons for 5 seconds.
Note: When the system is armed or a USB cable is connected to the panel, you cannot activate the Wi-Fi
access-point.
3. Connect the wireless device to the panel’s Wi-Fi access-point. Enter the Panel ID when requested to enter
the SSID (Panels Services Set Identifier) and enter the serial number of the panel when requested to enter
the password. Both numbers are printed on a sticker on the panel. Alternatively, select the INSTALLER > 10:
SERIAL NUMBER menu to view this information.
4. When the wireless device is connected to the panel, start the configuration application.
5. When the configuration is complete, from the ACCESS-Point menu, select STOP A.Point to close the
access-point.
Access-point can be deactivated by pressing both (+) and (-) buttons for 30 seconds.
Note: By default the total time for access-point activity is one hour. Five minutes before the access-point is
deactivated, a message is sent to the installer. You can extend the time by activating the access-point again
from the menu.
From the installer mode menu, select the following options:
04:COMMUNICATION  8: WiFi  ACCESS-POINT
Option
Configuration Instructions
8:WiFi > ACCESS-POINT
From the Wi-Fi ACCESS-POINT menu you can enable, activate, and deactivate an
access-point.
8: WiFi > ACCESS-POINT >
A.POINT MODE
To enable Wi-Fi access, from the ACCESS-POINT menu select A.POINT MODE. Select
enable to activate or disable to deactivate wireless activity.
Options: Disable (default); Enable.
Press to return.
8:WiFi > ACCESS-POINT >
START A.POINT
To activate an access-point channel for wireless access, from the ACCESS-POINT
menu select START A.POINT.
The panel shows the status when you open the access-point channel.
For example, Please Wait, OK, or Fail.
Press to return.
8: WiFi > ACCESS-POINT >
STOP A.POINT
To close the access-point channel, from the ACCESS-POINT menu, select STOP
A.POINT.
The panel shows the status when you close the access-point channel.
Press to return.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic Powermaster-360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Powermaster-360 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info